surpip
04-18-2006, 05:04 PM
http://coloradok5.com/photos/data/500/109-0963_IMG.JPG
http://coloradok5.com/photos/data/500/109-0964_IMG.JPG
http://coloradok5.com/photos/data/500/109-0964_IMG.JPG
View Full Version : finished my first AK
1911Sooner
04-18-2006, 05:25 PM
Dude that looks nice! I can't wait to shoot it.:thumb:
MarkV
04-18-2006, 05:37 PM
Looks cool to me. How much do you have invested in it?
AresV
04-18-2006, 05:52 PM
The furniture matches your floor (or window sill?) nicely.
Looks good.
Looks good.
surpip
04-18-2006, 07:36 PM
Looks cool to me. How much do you have invested in it?
100$ for the kit ands the tapco FCG
75$for the reciever
20$ for the taps bits and screws.
14-20 for the clips.
so under 200 for the gun.
plus some spary paint, and red loctite
100$ for the kit ands the tapco FCG
75$for the reciever
20$ for the taps bits and screws.
14-20 for the clips.
so under 200 for the gun.
plus some spary paint, and red loctite
BUDMAN-BILL
04-18-2006, 07:49 PM
Dude, I want one but in a underfolder. Was it a pain in the butt or??
surpip
04-18-2006, 08:25 PM
Dude, I want one but in a underfolder. Was it a pain in the butt or??
pretty easy, i used simple hand tools, and a pos drill press
pretty easy, i used simple hand tools, and a pos drill press
MarkV
04-19-2006, 08:07 AM
100$ for the kit ands the tapco FCG
75$for the reciever
20$ for the taps bits and screws.
14-20 for the clips.
so under 200 for the gun.
plus some spary paint, and red loctite
cool :)
75$for the reciever
20$ for the taps bits and screws.
14-20 for the clips.
so under 200 for the gun.
plus some spary paint, and red loctite
cool :)
montesa
04-21-2006, 10:52 AM
Have you tried bending your own recievers from flats? I have been thinking about doing that or building the AR reciever from an 80% forging. If you are interested, I would go in on a AK reciever bending jig with you.
surpip
04-22-2006, 11:55 PM
Have you tried bending your own recievers from flats? I have been thinking about doing that or building the AR reciever from an 80% forging. If you are interested, I would go in on a AK reciever bending jig with you.
i bent some flats with a jig a browed from a dude on another site
they did not turn out exact enough for me to want to use them, mostly because the jig was not made well.
but with a good jig i would be willing to build another one
i bent some flats with a jig a browed from a dude on another site
they did not turn out exact enough for me to want to use them, mostly because the jig was not made well.
but with a good jig i would be willing to build another one
montesa
04-23-2006, 04:50 PM
i bent some flats with a jig a browed from a dude on another site
they did not turn out exact enough for me to want to use them, mostly because the jig was not made well.
but with a good jig i would be willing to build another one
Yeah, I don't know much about the jigs, I have just read about them a few times. I am going to keep reading and looking and see what kind are supposed to be the best. I know for sure that I want to build one from scratch. I will keep you up to date.
they did not turn out exact enough for me to want to use them, mostly because the jig was not made well.
but with a good jig i would be willing to build another one
Yeah, I don't know much about the jigs, I have just read about them a few times. I am going to keep reading and looking and see what kind are supposed to be the best. I know for sure that I want to build one from scratch. I will keep you up to date.
vBulletin® v3.6.7, Copyright ©2000-2010, Jelsoft Enterprises Ltd.