20 in uppers???

**higgimw** · 09-10-2012, 10:37 AM

I need a complete 20 in A2/A3 upper with BCG/CH. Who has them in stock. Del-Ton is out, PSA is out, J&T is out, Model 1 is out for God's sake. Where do I get one for around $400.00 besides those guys? Thanks.

Mike

**CAR-AR-M16** · 09-10-2012, 10:43 AM

Ohio Ordnance Works has used FN M16A2 uppers for around $335, but the do not have the BCG or CH.

http://www.ohioordnanceworks.com/Par..._AR15Parts.cat

**henschman** · 09-10-2012, 11:47 AM

PK has them... scroll down and you will see them. They are more than $400 though: http://www.pkfirearms.com/FN_Custom_Uppers/193/c

Also they use a non HPT/MPI bolt from Rock River.

**ColtDogg** · 09-10-2012, 12:20 PM

May want to try Fat Boy Tactical. Jeff has a few uppers at a real good price. I dont know if he has a 20" or not.

**higgimw** · 09-10-2012, 01:12 PM

Originally Posted by ColtDogg

May want to try Fat Boy Tactical. Jeff has a few uppers at a real good price. I dont know if he has a 20" or not.

Maybe he'll get hold of me. Thanks.

**AtomicTango** · 09-10-2012, 01:30 PM

Had the same issue myself recently, Fat Boy Tactical made it happen though. Not sure if he's got any 20in in stock right now.

Seems like Del-Ton is out of everything. All the time.

**higgimw** · 09-10-2012, 01:51 PM

With the election coming up that is going to get more common. I need this upper before then if I can swing it.

**AtomicTango** · 09-10-2012, 04:01 PM

Originally Posted by higgimw

With the election coming up that is going to get more common. I need this upper before then if I can swing it.

That's why I built this one, resale is good.

**higgimw** · 09-10-2012, 08:21 PM

I found my upper on Midwayusa.com. Paid a little more than I wanted to, but it'll have to do. It is all DPMS. Sad thing is thing is I am putting it on a Franken-Lower... Oh well. I am keeping this one to shoot anyway.

**AtomicTango** · 09-11-2012, 03:49 AM

I've seen a couple of deals on midway that weren't half bad, bit too much markup though.

**AKguy1985** · 09-11-2012, 04:12 AM

I've been waiting on a BCM 20in upper for awhile, still no dice.

**DeerAssassin** · 09-11-2012, 05:23 PM

Red X Firearms did a good job on mine...I know you guys don't really like smaller less known manufacturers but they did a bang up job on mine, it's way more accurate than I am. I've got the 20" with SS bull barrel.

http://www.redxarms.com/

**Daryl Licht** · 09-11-2012, 09:03 PM

Check DSA at www.dsarms.com. They don't mention whether items are in stock, so you might have to contact them. M&A parts at www.mapartsinc.com might be worth a look too.

Both M&A and Model1 usually show up at the Wanenmacher show. They may have something right there if you can wait that long.

**AKguy1985** · 09-12-2012, 04:33 AM

Originally Posted by CAR-AR-M16

Ohio Ordnance Works has used FN M16A2 uppers for around $335, but the do not have the BCG or CH.

http://www.ohioordnanceworks.com/Par..._AR15Parts.cat

Thats a decent deal. When i do an A2 i may get one.

**ripnbst** · 09-12-2012, 10:27 AM

Midway has some, more than you're wanting to pay though.

Cheaper than dirt has some too, same story. This one comes with BCG and CH though.

I cant imagine that Rijas wouldnt have something they could sell you. No chance in hell it'd be anywhere near $400 though.

I saw Red X arms at the Wannamacher last year. Their stuff was VERY competitively priced, I hadn't heard about anyone who bought from them until recently though.