Forums
New posts
Search forums
What's new
New posts
New media
New media comments
Latest activity
Classifieds
Media
New media
New comments
Search media
Log in
Register
What's New?
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Navigation
Install the app
Install
More Options
Advertise with us
Contact Us
Close Menu
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Forums
The Range
Handgun Discussion
Reloads in a glock
Search titles only
By:
Reply to Thread
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="alank2" data-source="post: 1470691" data-attributes="member: 108"><p>Hi ImpalaSS,</p><p></p><p>I agree that safety is the most important aspect. That is why I came up with the product in my signature, it watches press actions and makes sure you don't short stroke the press, etc. With 40s&w, I think brass inspection is the most important thing to do. Many people don't do it though because inspecting brass is a tedious job. A reasonable load and a non-polygonal barrel fro lead are also up there in safety importance. One more thing I'm not sure has been mentioned is that in taper crimp cartridges like the 40s&w, setback protection is provided by the first step - properly resizing a case. The case neck tension set their is what holds a bullet in place and the final step of "crimping" (taper crimping) is just to remove the belled case top.</p><p></p><p>Good luck,</p><p></p><p>Alan</p></blockquote><p></p>
[QUOTE="alank2, post: 1470691, member: 108"] Hi ImpalaSS, I agree that safety is the most important aspect. That is why I came up with the product in my signature, it watches press actions and makes sure you don't short stroke the press, etc. With 40s&w, I think brass inspection is the most important thing to do. Many people don't do it though because inspecting brass is a tedious job. A reasonable load and a non-polygonal barrel fro lead are also up there in safety importance. One more thing I'm not sure has been mentioned is that in taper crimp cartridges like the 40s&w, setback protection is provided by the first step - properly resizing a case. The case neck tension set their is what holds a bullet in place and the final step of "crimping" (taper crimping) is just to remove the belled case top. Good luck, Alan [/QUOTE]
Insert Quotes…
Verification
Post Reply
Forums
The Range
Handgun Discussion
Reloads in a glock
Search titles only
By:
Top
Bottom