Wicked Edge users...

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

348

Sharpshooter
Special Hen
Joined
Apr 20, 2009
Messages
3,267
Reaction score
17
Location
.
I've made up my mind to buy the Wicked Edge, but I don't want to over-buy. What's the highest grit you use on your knives? Is 1000 good enough, or are the[FONT=Arial, Helvetica, sans-serif] [/FONT]5/3.5 Diamond and Leather Strops worth the extra? Or is the full blown Pro pack 2 the only way to go?
 

Dale Atkerson

Sharpshooter
Special Hen
Joined
Sep 4, 2013
Messages
134
Reaction score
1
Location
Purcell
I use up to 1000. Hardly ever below 600 unless it is very dull and needs the edge reshaped. But then I usally go to the grinder and a 600 grit belt. I prefer to stop on a piece of leather streatched and nailed or glued to a board by hand. Great system for anyone, especialy for the ones that are angle chalaged. Good luck.
 

ez bake

Sharpshooter
Special Hen
Joined
Sep 22, 2005
Messages
11,535
Reaction score
0
Location
Tulsa Area
I would consider the Pro Kit almost worthless without the strops. I added the ceramic stones and probably wouldn't do it again to be honest though. I've got what is essentially the Pro Pack 2 (mine is an older version), but you can add the strops if you want them. I'd go with the Pro Pack I personally.

The 800/1000 stones take quite a bit of the major scratching out of the edge to then go into the strops with diamond paste and get a nice mirror edge.

Once I get my folders re-profiled and shiney-edged, I rarely go back with anything other than the strop and touch-up the micro-bevel.
 
Last edited:

juscvin

Sharpshooter
Special Hen
Joined
Nov 30, 2010
Messages
250
Reaction score
0
Location
Sulphur
You've gotta get the strops. However if you aren't looking for a mirror finish then up to 1000 grit will work fine. If you are looking for a mirror finish then I recommend both the ultra and micro fine stones
 

frankos72

Sharpshooter
Special Hen
Joined
Feb 29, 2008
Messages
665
Reaction score
0
Location
Moore
I have the ceramics and have used them every time I sharpen a knife. To take it even further, I have sandpaper in some ultrafine grits that I bought from Hobby lobby. I cut it to match the face and I tape it on a couple stones . I haven't done it lately, but when I go through the full selection of sandpapers the blade edge looks like a true mirror. I always finish up with the strops .
 

7stw

Sharpshooter
Supporting Member
Special Hen Supporter
Joined
Apr 4, 2011
Messages
1,848
Reaction score
274
Location
Piedmont
Sorry for the necropost but I got one of these for Christmas and was just wondering what I any accessories I needed to add. Anyone else used one of these systems ? Seems like a sweet setup so far. Still messing around with it trying to figure everything out.


Sent from NSA wire tapped device.
 

Latest posts

Top Bottom