T/C 45/410 choke tube

[ahlosojoe]

I would really appreciate some help on removing a stuck choke tube from a T/C 45/410 barrel. Just bought the barrel and discovered choke is seriously stuck. I do not have the special wrench for removing the choke. How about it? Thanks, Joe

 

[Okie4570]

https://www.amazon.com/Thompson-Center-Arms-Multi-Use-Combination/dp/B000PWDFPA

If you think it's seized, fill a tube just larger than the barrel diameter with Kroll or PB Blaster and let the barrel end soak for 24 hours before trying to remove it. Test the oil on a test spot on the bluing first.

 

[Master Carper]

What Oakie4570 said!

I love my 45/410! Shooting Remington 3" #6 has accounted for literally hundreds of rabbits and squirrels, plus several crows and two wild turkeys.

I hope you can safely get that choke tube removed and if worse comes to worse, you can use an easy out to remove the choke tube.

 

[SPDguns]

STOP!!!!!!! THIS CHOKE TUBE HAS LEFT HAND THREADS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Pm sent.

 

[dennishoddy]

STOP!!!!!!! THIS CHOKE TUBE HAS LEFT HAND THREADS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Pm sent.

Whoa! seriously? The only gun on the market with that?

 

[SPDguns]

Yes. Don't ask me how I know this......

 

[Okie4570]

This says righty tighty, lefty loosy.

 

[SPDguns]

Whoa! seriously? The only gun on the market with that?

Yes. Weird, isn't it????

 

[ahlosojoe]

I know you were all holding your breath over my stuck choke in my T/C 45/410. Well you can breath! All is well. I stood the barrel in a container of a good penetrating oil for over a week...really would not have taken that long but I had other deer to kill. Took a large screwdriver and applied a considerable amount of counter-clockwise pressure and voila! out it came. Thanks to all of you guys for your help.

 

[Master Carper]

Glad you were able to safely remove it. Good job!