Anyone in the Tulsa area have a sight pusher that will fit a Glock 43 and be willing to take off a rear sight/install a new sight for me?
Sent from my SM-G930V using Tapatalk
Sent from my SM-G930V using Tapatalk
The rear sight on my G43 needed to be moved and I just took a wooden dowel rod and it moved over very easy. I know the rear sight would be easy to get out, I don't know how hard it would be to get a new one back on. I bet you can do it yourself very easily. Good luck.
I use a punch made of aircraft grade aluminum to drift my sights in or out.
I don’t know if you have bought your sights yet or if you could return them, but I know of a couple local gun shops that will do it for free if you buy the sights from them. They were priced well too, about what I could find online.
Action Arms: Mingo south of 51st
Bear Beam: 41st and mingo.
They might be willing to do it for a very small fee or if you buy something else from them.
As several others above; use a padded vise, and a nylon, aluminum or brass punch and just tap out/tap in if you don’t have easy access to a tool. It will work just fine unless you get all gorilla-like with the hammer.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Thanks for the info. I'll give it a shot with a nylon punch.
Sent from my SM-G930V using Tapatalk
Sent from my SM-G930V using Tapatalk
If the dovetail to sight fit is really tight, the nylon punch probably won't work.
You will need aluminum or brass. Good luck.
Yeah, also... nylon is somewhat "bouncy" (elastic?) and can easily push the sight beyond intended placement once you achieve movement.
Personally, I'd go with aluminum or brass.
Personally, I'd go with aluminum or brass.
Similar threads
