Tools to crown a .22 barrel

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Catt57

Gill-Gun Guru
Supporting Member
Special Hen Supporter
Joined
Aug 1, 2014
Messages
7,710
Reaction score
15,304
Location
OKC / Bristow
I need to recrown a .22 barrel that has been cut down by a previous owner. The cost for the tools is a bit much for a single job. I was wondering of anyone has the tools and wouldn't mind either letting me bring the rifle to them or letting me borrow the tools for a bit.
 

dlbleak

Sharpshooter
Staff Member
Supporting Member
Special Hen Administrator Moderator Supporter
Joined
Mar 15, 2009
Messages
21,038
Reaction score
25,097
Location
edmond
I’ve used a brass round head bolt and some die grinding compound to smooth an old barrel up. I think I found the vid on YouTube. Chuck the threads in a drill and used the bolt head to smooth it up. It’s kinda slow going but it’s cheap.
 

okierider

Sharpshooter
Staff Member
Supporting Member
Special Hen Moderator Moderator Supporter
Joined
Dec 26, 2016
Messages
8,665
Reaction score
12,712
Location
OKC
I’ve used a brass round head bolt and some die grinding compound to smooth an old barrel up. I think I found the vid on YouTube. Chuck the threads in a drill and used the bolt head to smooth it up. It’s kinda slow going but it’s cheap.
This worked for me as well!!

Sent from my SM-G892A using Tapatalk
 

Latest posts

Top Bottom