Absolutely. I was ordering airbag sensors last month, thought I'd replace my gimpy running light, added 2 to the order for an extra eighty cents, added $7 in shipping.
I don't know if you guys know this but you can negotiate prices at O'Reilly's. I've had them match online prices and have negotiated other prices on some items. 
I just put in an a partial order from Rock Auto. It was mostly all fuel, ignition, brake, hoses, etc, Spent about $180 plus aroubd 16 tax and 30 ship. Saved a couple bucks if it’s cool. All AC Delco
Let y’all know how it works out.
I have done that quite a few times.
Last time it was for oil filters PF1233 AC filters I have 3 cars that use them and I got 30 filters for a tick under 3 bucks each.
Rock auto has them for $2.84 So they got really close to Rock Auto.
@swampratt My Shizz is just a gonna be a a cruiser. I think I’ve seen yo in El Reno
I have been there a few times.
My car is a cruiser also.
Only set it up with a tunnel-ram and gears and converter to beat up on my buddy.
Right now it has the RPM intake and 750 edelbrock 370 gears and a tight converter.
I recently installed AC in it.
and pulled my 20 foot pontoon to Texas side of Texoma lake August of this year.
AC blowing and windows up.
Cruiser - work car- parts chaser- drag car when the time arises and hunting vehicle.
I use my stuff like you would not believe.
The air conditioning thread.
https://www.okshooters.com/threads/1957-chevy-salvage-yard-ac-retrofit.278771/
here is what it looked like after some primer and body work. then paint job faded out in 1 year and made it look old.
Found out polyurethane paint should not be touched by Carnuba wax as it will fade and chalk out.
Like boat paint.
Mine still has original ball joints and other original suspension parts.
I will change them if they fail.
My car is a cruiser also.
Only set it up with a tunnel-ram and gears and converter to beat up on my buddy.
Right now it has the RPM intake and 750 edelbrock 370 gears and a tight converter.
I recently installed AC in it.
and pulled my 20 foot pontoon to Texas side of Texoma lake August of this year.
AC blowing and windows up.
Cruiser - work car- parts chaser- drag car when the time arises and hunting vehicle.
I use my stuff like you would not believe.
The air conditioning thread.
https://www.okshooters.com/threads/1957-chevy-salvage-yard-ac-retrofit.278771/
here is what it looked like after some primer and body work. then paint job faded out in 1 year and made it look old.
Found out polyurethane paint should not be touched by Carnuba wax as it will fade and chalk out.
Like boat paint.
Mine still has original ball joints and other original suspension parts.
I will change them if they fail.
Wish I'd seen this earlier, but Rockauto 5% off codes are plentiful...
Similar threads
- Locked
