Harbor freight white First coat.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

swampratt

Sharpshooter
Supporting Member
Special Hen Supporter
Joined
Nov 3, 2010
Messages
12,719
Reaction score
19,274
Location
yukon ok
My Hi-Points have a large bore.
I can't put a big enough cast bullet into a case and have it chamber in the gun.
So I cast the bullets on the softer side and use a quick powder to bump up the soft bullet into the grooves quicker to seal it off.
When I powder coat for the 40 and 45 I use soft lead same as I use for the mouse fart loads in 30 cal.

Some may think harder is the way to go .. and it may be for really fast cast loads with much more pressure.
 

DRC458

Sharpshooter
Supporting Member
Special Hen Supporter
Joined
Mar 1, 2006
Messages
11,530
Reaction score
10,886
Location
Enid, OK.
Yep. Just cast, coat, then size to desired diameter. It seems that most of the bullets I have coated have added about .003" to .004". I have toyed with the idea of trying to add a second layer of coating, but haven't tried it yet.


.
 

DRC458

Sharpshooter
Supporting Member
Special Hen Supporter
Joined
Mar 1, 2006
Messages
11,530
Reaction score
10,886
Location
Enid, OK.
How many bullets does a 1/2 pound coat roughly


Sent from my iPhone using Tapatalk


Honestly? ... I have no idea. A half-pound of powder will coat a 'ton' of bullets. It takes so little powder to coat a bullet that it seems to last forever. I seriously wouldn't wager a guess. I've got a pound of red, a half-pound of white, a half-pound of blue, and a pound of bronze (which I don't like). You can hardly tell I've used any out of any of them. I've probably used more of the red than anything else, and I'm sure I still have over a half-pound left. I started with the Harbor Freight red because everybody said it worked well. Then, I bought other colors that I found on sale (Eastwood). @swampratt has more experience than anyone else I know of, so he may have a reasonable idea.


.
 

swampratt

Sharpshooter
Supporting Member
Special Hen Supporter
Joined
Nov 3, 2010
Messages
12,719
Reaction score
19,274
Location
yukon ok
I have done really close to 90 lbs of bullets in the red and used about 1/2 of the 1 lb container.
Shake and bake method.

DRC458 stated 1 ton for 1/2 lb of powder..I guess my bullets are coated thicker.
And his arms must be HUGE after shake-n-baking that many boolits :)
 

turkeyrun

Sharpshooter
Special Hen
Joined
Feb 11, 2013
Messages
8,988
Reaction score
8,590
Location
Walters
No. Not at all. It eliminates the need to lube cast bullets. Instead, they have a hard, baked-on 'jacket.' You cannot drive them to the velocities you can a jacketed bullet, but you can drive them at least as fast as a standard cast bullet. And, they are so much easier to handle. @swampratt has mentioned a number of the advantages in other places, including, not having to mess with a sticky lube that may melt under atmospheric heat. It's fun and easy to do!


,
I have loaded PC bullets up to 2500 fps with NO PROBLEMS
 

Latest posts

Top Bottom