Separate names with a comma.
Welcome to Oklahoma Shooters Association! Join today, registration is easy!
I have used Glue sticks in 45acp they shoot well with primer only.
I then got a wild idea to pump the glue from the glue gun into my 45 mold. It...
Line up a spot for a screw and take a center punch and give it a tap see if it dinks the steel.
If it does then you can drill and tap it.
I have done really close to 90 lbs of bullets in the red and used about 1/2 of the 1 lb container.
Shake and bake method.
DRC458 stated 1 ton for...
I have the Lee Classic cast iron.
Yea not bored with the grand son here and the wife.. wife was doing something and the boy was sleeping.
I was not sure how much you could size a bullet down in a Lee push through sizer die.
Well I wanted to find out just because I can and I wanted...
My Hi-Points have a large bore.
I can't put a big enough cast bullet into a case and have it chamber in the gun.
So I cast the bullets on the...
Depends on what powder coat is used .002" or more will be added.
I do not resize.. I cast them and then powder coat them and run them through a...
You can get velocities with low pressure but I did not get the accuracy only bragging rights.
I now have favorite powders and Bullseye is one.
That long shot powder can reach some ridiculous velocities.
Steel cased 45acp 230 gr can be sent quite quickly in a strong gun.
The powder coat will add the diameter you need.
But once you go there ..it is hard to turn back to sticky lube unless your accuracy suffered.
OH YEA I did have some of the Alox lubed bullets get all runny on me in the heat.
Here is the last batch of Easter Egg.
I knocked some over...
When I read the title I said MIL-DOT.
That is also my favorite.
Good report on the eastwood white ..about the same as HF.
I would be saddened if I had to order that and got the same results as HF.
And another awesome story ..Thank You PR-6284.
coverage was good..I think the rest of my bullets will look like that.. it passed the hammer test.
Place coated bullet on hard ground and smash...
I did get a hanging one a couple years ago on clearance.
That thing is bad to the bone!
I use foot hold traps in my yard to get unwanted critters.
Your way looks like much more fun.
I am not going to pay 50 bucks for a phone much less 1400.
Back under my rock I go.
Then you must dry them.
Drying sucks, another time consuming task .
They cool pretty quick anyway by the time you do 50 cases the first one is...
My fingers get used and my fingers are very very dry and I clean them before i touch the bullets.
I was using some really cool fine pliers.....