Hello,
I've not done an all-original article in a while, and I miss it. I hope you find it helpful.
If you have trouble viewing this, you may see it at http://smith-sights.com/tech-look-gew88 .
There are multiple JPEGs below and one large JPEG at the link. You may right-click-save-as if you...
Hello,
I was playing with different methods of shining brass.
Wet tumbling, I used 2 cups water and added one tablespoon lime juice.
This is the result:
I hope this helps someone!
Regards,
Josh
Hello,
If the magazine makes contact with the receiver, even with my shims installed, then it's a good idea to use the magazine shims. Otherwise, don't. That's probably the same advice you got on Gunboards (good folks) but I'm repeating it, just in case.
I do apologize for any wait...
Hello,
I take it you got the shims I sent OK, didn't you?
We know your email doesn't go through to me for whatever reason, but if you'd like to give a Finn HV mag a spin, I'll trade you even money for yours that has stripped threads. Contact me here or on that other forum.
Regards,
Josh
And sorry for the pics above not showing up. Photobucket is having problems with their Pro accounts, which I have. The pics should be back up shortly, according to them.
Regards,
Josh
The existing ghost ring is about 0.125". This aperture shown is 0.094.
I don't really like the 0.094" as it just falls in between ghost ring and not-ghost-ring, and if I go to production, the standard aperture size will be about 0.063 or so to start with, anyway.
I still like the ghost ring...
Hello,
I'm currently in the office/workshop. Orwell is on internet radio, and I'm filling sight orders.
I've also prototyped an interchangeable aperture rear peep. The first size is 3/32", which is my favorite size peep sight.
Pictures to follow later tonight or sometime tomorrow.
Regards...
Ronny,
I'll do that as soon as I can. I've done sub-MOA with this rifle, but unknowns include the ammo as well as (as you mentioned) the shooter being sick, and inclement weather conditions.
On the other hand, I didn't have to work for these groups. With standard tangent sights, this group...
Hi Folks,
I've been asked by folks here and elsewhere for a range report for this sight.
Conditions were about 34F, light wind, and overcast with snow flurries turning into snow showers.
Distance was 75 or 80 yards. Though I lasered it at 75 yards, my shooting position changed...
Please excuse the surroundings and the picture quality. I did this at home, not the shop, in response to some concerns that the cocking piece will move on the x and y axis and not only the z axis. The first part demonstrates that I have a standard sear, while the second and third parts give...
Hello,
The twist is 1:9.5". The original bullet weight was 212 grains, cupro-nickel plated.
I find mine to really like SMKs and Hornady Match BTHP, but as long as a bullet is uniform over-stabiliztion won't be noticed by the average shooter, or even most excellent shooters. Seems to be...
I want to advertise here -- I make those for a living. A rather large selection. Been trying to get ahold of someone to give me a price quote!
I tried floating the barrel, but it just started shooting in circles and opened up a little. The cork is only at the front node that the Russian...
Hi All,
I'm hoping this might help some folks.
I apologize in advance for the screw heads; they were taken apart literally hundreds of times. I've since replaced them and found a proper bit for my torque wrench that will not cause damage to the new ones, even over the long-term...
Hello,
You will find the best quality were made between wars. Look for pre-1939 on the shank.
A Finn is preferable, but if you don't mind a little work you can make a 91/30 with good bore and good crown shoot like an M39. By "a little work" I mean nothing more than making metal shims by...
You tell him you had a feller who wanted to look it over for you?
I only wonder because if he's in the area and only let go of the pics when you said that (or did he?) then perhaps he's someone us local to him need to watch.
I'll get ahold of my friend in Swayzee and tell him it's a no-go...
Hello,
I got your PM. I'll post the reply here for perpetuity's sake:
I'll make the full drive if I need to though. I'd hate to see you get burned.
Josh