Sooner State Pawn Oklahoma Second Amendment Association 2A Shooting Center Harsh Firearms
Page 1 of 2 12 LastLast
Results 1 to 15 of 16
  1. #1

    Default Best Metal Stock supplier in Tulsa?

    Specifically round and bar stock aluminum and steel.

    My googlefu is sucking for actual stock suppliers. All I keep getting is recyclers, metal roofing companies, and fabrication shops.

    I was told that Borg recyclers had a reclaimed stock sales shop that sold by weight, but the last time the guy was there was 4+ years ago, and I can't find anything about it.

    Any suggestions? Thanks for the input.

  2. #2

    Default Re: Best Metal Stock supplier in Tulsa?

    Don't know about aluminum but Quick Service Steel is the place for steel.

  3. #3

    Default Re: Best Metal Stock supplier in Tulsa?

    Thanks BReeves, I know where that place is so I'll have to check it out!

  4. #4

    Default Re: Best Metal Stock supplier in Tulsa?

    Check and see if Metal supermarkets has a tulsa outlet we use them for specialty stuff.
    Custom metal fabrication work PM me for details.
    Feed back http://www.okshooters.com/showthread.php?t=68756
    Some of my work http://www.okshooters.com/showthread.php?118996

  5. #5

    Default Re: Best Metal Stock supplier in Tulsa?

    Doesn't look like it Prophet, thanks for the info though!

  6. #6

    Default Re: Best Metal Stock supplier in Tulsa?

    Anyone else have any suggestions on this? TIA!

  7. #7

    Default Re: Best Metal Stock supplier in Tulsa?

    Energy Alloys
    1888 North 109th East Ave
    Tulsa, OK 74116
    918.838.9821 Phone
    Feedback



    Rest in peace Steve ( Redmax51 ) you will be missed

  8. #8

    Default Re: Best Metal Stock supplier in Tulsa?

    I use onlinemetals.com, but I dont buy much. Only when Ive got a project going. Let me know if you find a good place in tulsa.

  9. #9

    Default Re: Best Metal Stock supplier in Tulsa?

    Ryerson in the Cherokee Industrial Park
    www.ryerson.com

    Or Metals Inc.
    http://www.metalsinc.com/default.htm

  10. #10

    Default Re: Best Metal Stock supplier in Tulsa?

    standard iron scrap yard always has aluminum bar and sheets in the big overhead area,,where you take in your aluminum cans...i have bought nuts and bolts and washers ..aluminum treadplate and stainless bar and aluminum

    interstate metals keeps some on hand also but the selection is poor most of the time...i did score some 2" block aluminum ,,paid like 10 bucks and made a carb adapter from it....i needed to mount a 2 barrel gm carb on an inline 6 ford 200
    my first stop would be standard iron

  11. #11

    Default Re: Best Metal Stock supplier in Tulsa?

    sorry i re read the post...IN TULSA...that post of mine was okc

  12. #12

    Default Re: Best Metal Stock supplier in Tulsa?

    I know your in Tulsa but Boeing in Witchita has an outlet store that all the people in NC part of the state go to.....(except me, I don't do a lot of aluminum)
    They have over runs of extra equipment plus lots of aircraft grade aluminum and some steel.
    Quote Originally Posted by JB Books View Post
    DennisShoddy is the 12th Imam
    Common sense is not a Gift....
    Its a punishment, because you have to deal with everyone who doesn't have it.

    Dennishoddyfeedback thread: https://www.okshooters.com/showthrea...74-Dennishoddy

    WHEN DEMOCRACY TURNS TO TYRANNY, THE ARMED CITIZEN STILL GETS TO VOTE

  13. #13

    Default Re: Best Metal Stock supplier in Tulsa?

    what are you looking for?... I've got some aluminum stock on hand that I'd part with.

    Quote Originally Posted by JRSherman View Post
    Specifically round and bar stock aluminum and steel.

    My googlefu is sucking for actual stock suppliers. All I keep getting is recyclers, metal roofing companies, and fabrication shops.

    I was told that Borg recyclers had a reclaimed stock sales shop that sold by weight, but the last time the guy was there was 4+ years ago, and I can't find anything about it.

    Any suggestions? Thanks for the input.
    Please feed my feedback ... thanks...
    http://www.okshooters.com/showthread...highlight=_cy_

  14. #14

    Default Re: Best Metal Stock supplier in Tulsa?

    Quote Originally Posted by bulbboy View Post
    Energy Alloys
    1888 North 109th East Ave
    Tulsa, OK 74116
    918.838.9821 Phone
    Quote Originally Posted by DirtyDawg View Post
    Ryerson in the Cherokee Industrial Park
    www.ryerson.com

    Or Metals Inc.
    http://www.metalsinc.com/default.htm
    Thanks, I'll have to look into these places.

    Quote Originally Posted by Gun$linger View Post
    I use onlinemetals.com, but I dont buy much. Only when Ive got a project going. Let me know if you find a good place in tulsa.
    You might look into switching to McMaster Carr, I looked at some of onlinemetals.com's prices and they look a little pricier than McM-C.

    Quote Originally Posted by swampratt View Post
    sorry i re read the post...IN TULSA...that post of mine was okc
    NP. As much metal work is happening in Tulsa I'm kind of surprised at what little I'm finding.

    Quote Originally Posted by dennishoddy View Post
    I know your in Tulsa but Boeing in Witchita has an outlet store that all the people in NC part of the state go to.....(except me, I don't do a lot of aluminum)
    They have over runs of extra equipment plus lots of aircraft grade aluminum and some steel.
    Thanks for the info Dennis. That's a long haul but may be worth it, I may look into that.

    Quote Originally Posted by _CY_ View Post
    what are you looking for?... I've got some aluminum stock on hand that I'd part with.
    Right now I'm kind of on the looking end. I'm fixing to get a small mill, and trying to look for local suppliers for standard sizes.

    But depending on what you have and what you want for it, I've got some room to spare until then .

  15. #15

    Default Re: Best Metal Stock supplier in Tulsa?

    sounds like you needs scrap steel and aluminum to play with.
    rather than a specific project.

    do a bit of digging at local machine shops... they all have scrap bins that you can purchase at scrap aluminum prices. 60cents lb is what metal salvage will pay for aluminum, they turn around and sell for 3-4x+ that when they retail machinable stock.

    Quote Originally Posted by JRSherman View Post
    Thanks, I'll have to look into these places.



    You might look into switching to McMaster Carr, I looked at some of onlinemetals.com's prices and they look a little pricier than McM-C.



    NP. As much metal work is happening in Tulsa I'm kind of surprised at what little I'm finding.



    Thanks for the info Dennis. That's a long haul but may be worth it, I may look into that.



    Right now I'm kind of on the looking end. I'm fixing to get a small mill, and trying to look for local suppliers for standard sizes.

    But depending on what you have and what you want for it, I've got some room to spare until then .
    Please feed my feedback ... thanks...
    http://www.okshooters.com/showthread...highlight=_cy_

Similar Threads

  1. Best Chinese buffet in the Tulsa area...
    By Lurkerinthewoods in forum General Discussions
    Replies: 14
    Last Post: 09-01-2012, 09:16 PM
  2. best synthetic stock
    By tjones96761 in forum Rifles
    Replies: 1
    Last Post: 03-24-2011, 10:02 PM
  3. Where is the best gun shop in Tulsa?
    By Fly in forum Rifles
    Replies: 44
    Last Post: 12-31-2010, 04:51 PM
  4. Anyone Making Metal Targets Local in Tulsa?
    By TheLastDaze in forum Gun Club/Range Talk
    Replies: 0
    Last Post: 01-19-2010, 08:24 PM
  5. Best place in Tulsa for CCW holster?
    By Dustin98SS1 in forum Self Defense and Handgun Carry (Concealed and Open)
    Replies: 12
    Last Post: 10-28-2009, 03:01 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •