Forums
New posts
Search forums
What's new
New posts
New media
New media comments
Latest activity
Classifieds
Media
New media
New comments
Search media
Log in
Register
What's New?
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Navigation
Install the app
Install
More Options
Advertise with us
Contact Us
Close Menu
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Forums
Hobbies & Interests
Gearheads
02 Tacoma
Search titles only
By:
Reply to Thread
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="rj ︈" data-source="post: 3594078" data-attributes="member: 46029"><p>I took the whole front end apart over the past few days. I bought new upper and lower control arm bushings, lower and upper ball joints, outer tie rod ends, steering rack bushings, CV axles, and probably some other stuff I am forgetting.</p><p></p><p>I borrowed a press from a family member's shop and rented the ball joint kit from a local auto parts store. I was able to get everything done myself other than the upper control arm bushings. I ended up hiring a shop to remove and press the new ones in for $30. They also pressed the lower control arm bushings in while I was there for free.</p><p></p><p>While I had everything apart, I cleaned it up really well and put a coat of spray paint.</p><p></p><p>I'll be putting everything back together today and hopefully can get an alignment this weekend.</p><p></p><p>[ATTACH=full]210012[/ATTACH]</p><p></p><p>Side note: Thanks to [USER=4437]@Prostick[/USER] for driving out to my house to purchase some goods to help finance this project.</p></blockquote><p></p>
[QUOTE="rj ︈, post: 3594078, member: 46029"] I took the whole front end apart over the past few days. I bought new upper and lower control arm bushings, lower and upper ball joints, outer tie rod ends, steering rack bushings, CV axles, and probably some other stuff I am forgetting. I borrowed a press from a family member's shop and rented the ball joint kit from a local auto parts store. I was able to get everything done myself other than the upper control arm bushings. I ended up hiring a shop to remove and press the new ones in for $30. They also pressed the lower control arm bushings in while I was there for free. While I had everything apart, I cleaned it up really well and put a coat of spray paint. I'll be putting everything back together today and hopefully can get an alignment this weekend. [ATTACH=full]210012[/ATTACH] Side note: Thanks to [USER=4437]@Prostick[/USER] for driving out to my house to purchase some goods to help finance this project. [/QUOTE]
Insert Quotes…
Verification
Post Reply
Forums
Hobbies & Interests
Gearheads
02 Tacoma
Search titles only
By:
Top
Bottom