8x50R and GP90. Also, .32

[rakkal]

Outstanding, I can't watch the vid right now but that sounds like Steyr/Mannlicher dimensions. Looks like I need to get into casting my own bullets then!

 

[swampratt]

Yep and he mentioned using the 7.62x54 brass like you mentioned.. Guy had some good points. And showed a target he shot.
I wonder if you can get a gas checked bullet like that size.. or if paper patching could be an option.

 

[rakkal]

Not sure. I'll have to do some hunting, they have to exist somewhere.

 

[Blitzfike]

32ACP is a tapered case and won't work with the 32 short and long dies. I load all three and have no problem with the 32acp using the proper die set. I cast a 77 grain plain base bullet and run it through a lyman sizer/luber and they work great. Only have a two cavity lee mold, but they work fine.

 

[swampratt]

this mold may work.http://www.midwayusa.com/product/94...1-ogive-radius-gas-check?cm_vc=ProductFinding

 

[rakkal]

Blitz, noted. Need to look at the dimensions more...

Swamp, Hungarian could very well be it, and it is 8x56r so that's a very real probability. I'll measure mine and see what the dimensions are (The old still together 8x56r)