So far this week, I have learned how to repair oh craps on heavy machinery.
Repairing a D-9 Dozer idler shaft by adding metal to the shaft holder and line boring it back to hold the bushings. Using brass threaded bolts screwed into the threads to keep from filling the threaded holes is probably an old trick but genius to me.
Gouging setting to rapidly remove metal with a flat copper gouging rod.
Repairing a D-9 Dozer idler shaft by adding metal to the shaft holder and line boring it back to hold the bushings. Using brass threaded bolts screwed into the threads to keep from filling the threaded holes is probably an old trick but genius to me.
Gouging setting to rapidly remove metal with a flat copper gouging rod.