Barrel sculpting

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Master Carper

Sharpshooter
Special Hen
Joined
Nov 23, 2010
Messages
2,005
Reaction score
1,896
Location
Oklahoma
Since engraving the last two Colt Pythons and a couple of other "parts", here is one of my custom T/C Encore barrels that I have been working on for quite a while.

With the 4-port muzzle brake that I made and threaded onto the barrel, there is still no seam line showing between the muzzle brake and barrel, and I am able to engrave up onto the brake with no negative affect of the seam line showing.

The barrel is 1.200" in diameter, with an effective barrel length of 16 1/2", with an overall barrel and brake length of 18".

Once the barrel work is completed, I will start engraving on the receiver, but that will be quite a ways down the road.

IMG_3395.jpg
 

Latest posts

Top Bottom