Catastrophic failure- what do you think happened?

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

dlbleak

Sharpshooter
Staff Member
Supporting Member
Special Hen Administrator Moderator Supporter
Joined
Mar 15, 2009
Messages
21,037
Reaction score
25,086
Location
edmond
Gun is a Shield Plus. Ammo was Teflon coated cast bullets from U.S. Ammunition. Ammo was purchased at Ammo Depot. There is an empty case in the chamber. Looking at the pics, what’s the opinions of what happened here?
27DF9214-5009-4AC0-A193-77F3C3A90314.jpeg
BECFE3EE-AADE-4C59-94AB-0498F01E7172.jpeg
4F07AE8F-1C8A-4FDA-B8AC-220E96E3FF06.jpeg
44B4C785-8C16-4409-9653-9EFB236CACEF.jpeg
 

swampratt

Sharpshooter
Supporting Member
Special Hen Supporter
Joined
Nov 3, 2010
Messages
12,717
Reaction score
19,267
Location
yukon ok
Could take over 145psi to push a bullet into a case.
Pistol that is at least in my testing of powder coated bullets.

Now A buddy worked up loads for a 9mm of his with a fully supported chamber.
Below max by a couple tenths.
His fully supported chambered gun shot them excellent and sent many down range accurately.

Used the same ammo in his sons 9mm that did not have a fully supported chamber and the magazine blew out because the case ruptured.
Other parts broke also and looked like what you have there.

I got in the reloading book and looked at the load data and then seen some print I never seen before.
Probably because I did not load 9MM at that time.

Do not use these loads in chambers that are not fully supported.

Something like that.

how is the chamber shape on that one?
Unsupported on the bottom?
 

dlbleak

Sharpshooter
Staff Member
Supporting Member
Special Hen Administrator Moderator Supporter
Joined
Mar 15, 2009
Messages
21,037
Reaction score
25,086
Location
edmond
Yeah definitely. What's their customer service like? I've never dealt with them.
Just going by what my friend says, it’s a little lackluster even though that’s not what I’ve heard in the past. So far, it’s just been emails.
 

Latest posts

Top Bottom