Cleaning Brass

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Rolando

Sharpshooter
Special Hen
Joined
Aug 10, 2007
Messages
745
Reaction score
8
Location
Lincoln County
I would avoid sodium hydroxide (lye). I'd be afraid of chemical reactions weakening the brass. Go for the tumbler. With all the money you are saving by reloading you can justify the expense and a tumbler with corn cob does a great job with a bit of polishing liquid added in.
 

Kid Colt

Sharpshooter
Joined
Sep 15, 2009
Messages
259
Reaction score
0
Location
Broken Arrow
I concur with the majority on here. Avoid chemicals... you may not realize the reaction it is causing with your brass.

If you're doing things on the cheap, make your own rotary tumbler or find a used rock tumbler at a garage sale or thrift store... then you can also buy Kay-Kob 100% corn cob media at most pet or farm supply stores (it's litter or bedding) and use it to help with media costs. You can get a big bag for not much. Its larger than normal cleaning media but you can mix it or if you have larger cases you're cleaning just go with it... it works.
 

Sturgell

Sharpshooter
Special Hen
Joined
Mar 5, 2008
Messages
423
Reaction score
1
Location
Edmond
I concur with the majority on here. Avoid chemicals... you may not realize the reaction it is causing with your brass.

If you're doing things on the cheap, make your own rotary tumbler or find a used rock tumbler at a garage sale or thrift store... then you can also buy Kay-Kob 100% corn cob media at most pet or farm supply stores (it's litter or bedding) and use it to help with media costs. You can get a big bag for not much. Its larger than normal cleaning media but you can mix it or if you have larger cases you're cleaning just go with it... it works.

Avoid chemicals which contain ammonia, it does bad stuff to brass.
 

Blitzfike

Sharpshooter
Special Hen
Joined
Aug 16, 2006
Messages
2,096
Reaction score
10
Location
Tuttle, OK
A little mineral spirits will usually hold the dust and grit in suspension. That is probably what is causing the matte finish. When I start getting the matte look, I dump a couple of capfulls of mineral spirits in the tumbler and its good to go for another several hundred rounds. Blitzfike
 

Latest posts

Top Bottom