Dillon 750XL replacing 650

[Mad Professor]

I haven’t had mine long enough to really get it totally figured out and running smooth, but I’m already “looking” at the Mr Bullet Feeder. That seems like it would really speed up the process, but on the other hand, I’m not trying to meet any quotas.

The Mr. Bullet feeder is a great addition to a 650. I was usually able to assemble 1000 rounds in just under 50 minutes with mine. That was with primers loaded in tubes and everything ready to go.

Even though most if my loading is now done on a 1050 with an auto drive, I still load a lot of smaller batches of different calibers or bullet types on a 650.

The same Mr Bullet Feeder can also be moved to a 1050 if you decide to make that move.

 

[Lonewatie]

I picked up a 650 a few months ago, been using my 2 550's for a while, used my dads 550's before that, inherited his last year and bought a 900 last year. After messing with the priming system on my 650 i'm glad to see the 750 went to the slide bar. The 650 works fine but it can overfeed primers unless you pull the ramp or buy a cheesy "switch". Also i see the 750 will do up to 338lm which is a good stroke increase over the 650. Im hoping to need a 1050/1100 in the coming months but will probably buy a 750 first so i can set it up with large primer and leave the other small. Good price and a nice heft machine that comes standard with index roller bearing. I dont think anyone can go wrong with a 750.

Sent from my WIENER using Tapatalk

 

[Fyrtwuck]

Is there anything with the 650 that is interchangeable with the 750?

 

[Cowcatcher]

Is there anything with the 650 that is interchangeable with the 750?

Surely they use all the same stuff from the shellplate moving all the way up to the casefeeder. If not, well I doubt many folks will make the swap.

 

[Fyrtwuck]

Surely they use all the same stuff from the shellplate moving all the way up to the casefeeder. If not, well I doubt many folks will make the swap.

Some people buy the new models just to have the newest models. (I’m not one of them).

 

[Lonewatie]

Is there anything with the 650 that is interchangeable with the 750?

Everything in regards to caliber conversions save the priming component changes.

Sent from my WIENER using Tapatalk

 

[Lonewatie]

Looks like the failsafe rod is gonna be a little more in the way than the 650 but i think it has a spring loaded retainer on station 2 much like the 900 does

Sent from my WIENER using Tapatalk

 

[Lonewatie]

Not quite like the 900 but better than a button/550 or the flat bar/650 for checking/setting up powder charge

Sent from my WIENER using Tapatalk

 

[SoonerP226]

Are they improving the 650 with the 750 or are they trying to sell more presses?

The former is at least possible, if not probable, and the latter is pretty much why you change any product, so the answer to that question is likely "yes."

 

[Fyrtwuck]

Are there any videos that show how the new press operates?