Grandfather clock mechanic

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

ttown

Sharpshooter
Supporting Member
Special Hen Supporter
Joined
Jun 13, 2007
Messages
4,619
Reaction score
4,793
Location
Oologah
What’s wrong? Wound tight? Winding and never winds?

usually a good COA and a mainspring does the trick.

That’s clean,old,adjust, and mainspring.

Go to the NAWCC or 185 IHC but really there should be someone local that can do that work, these folks can give you a lead locally many times since those that enjoy the hobby or a business will join these clubs.

for what it’s worth

Ive built clocks but don’t have parts

https://www.nawcc.org/
https://ihc185.infopop.cc/eve/forums
 

xseler

These are not the firearms you're looking for.
Supporting Member
Special Hen Supporter
Joined
Jun 18, 2018
Messages
6,739
Reaction score
11,632
Location
Moore, OK
Keith with Tick Toc Clocks in Moore is a friend. He'll even come to you if needed. However, I don't know which rock you live under......

Good luck!!
 

TinkerTanker

Sharpshooter
Special Hen
Joined
Feb 10, 2022
Messages
1,247
Reaction score
3,221
Location
Edmond
I've got a retired clock repair guy that I use around Britton in OKC. He brought back several Seth Thomas clocks, one that I was sure wasn't repairable. He has several Grandfather clocks in his house he's collected over the years. My phone's having a case of AIDS right now so I can't pull up his number, but if you don't find a guy I can PM it to you on Wednesday when it's working again.
 

Latest posts

Top Bottom