- Location
- United States
These are HK G3 steel lowers that have had the SEF on the right side welded in and re-machined to mirror the left SEF and then painted with GunKote HK black.
This matches most newer (non blue/gray) HK's, PTR's and clones being currently manufactured.
It also includes a newly designed AMBI selector. These lowers are also clipped and pinned. Real clipped HK pins would fall out of the holes.
These end pins are machined bar stock to mimic the HK pin ends but will not push through and are seated in the lower pin hole.
The rear tang can be shortened so these will work on G3/91, 33/93, and MP5 weapons. These will not fit the "K" series.
NOTICE. Original steel lowers are designed internally to fit a 23mm FCG box. If your semi receiver-shelf is wider than .906 inches NO STEEL lower will fit it.
As all clones are built differently, you may need some minor fitting to fit this on yours. These were designed to, and fit, the HK91s that I use for measurements.
I only have 10 of these and that is all. $196 shipped insured.
These now include a brand new US manufactured Grip. By adding this unit you either maintain your US parts count or increase it by one.
This matches most newer (non blue/gray) HK's, PTR's and clones being currently manufactured.
It also includes a newly designed AMBI selector. These lowers are also clipped and pinned. Real clipped HK pins would fall out of the holes.
These end pins are machined bar stock to mimic the HK pin ends but will not push through and are seated in the lower pin hole.
The rear tang can be shortened so these will work on G3/91, 33/93, and MP5 weapons. These will not fit the "K" series.
NOTICE. Original steel lowers are designed internally to fit a 23mm FCG box. If your semi receiver-shelf is wider than .906 inches NO STEEL lower will fit it.
As all clones are built differently, you may need some minor fitting to fit this on yours. These were designed to, and fit, the HK91s that I use for measurements.
I only have 10 of these and that is all. $196 shipped insured.
These now include a brand new US manufactured Grip. By adding this unit you either maintain your US parts count or increase it by one.