I Need Help on Finishing an 80% Lower

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

swampratt

Sharpshooter
Supporting Member
Special Hen Supporter
Joined
Nov 3, 2010
Messages
12,717
Reaction score
19,267
Location
yukon ok
I assume you do not have any lower that is finished.

I measured a lower I did.

I do not know if that helps or not.
I must have touched a button my typing looks slanted :)
001.JPG
 

Slim Deal

Sharpshooter
Special Hen Banned
Joined
Dec 16, 2017
Messages
1,582
Reaction score
2,650
Location
NE OK
I need a detailed drawing showing where to drill the trigger pin holes and safety level hole on an 80% lower. Or if anyone has a jig I could borrow or rent. My lower is aluminum. Thanks.
Purchase or rent a jig to do this. Without a jig or CNC machine that you can operate you will end up with a lump of worthless aluminum. There are hundreds of jigs to choose from.
 

MR.T.

Sharpshooter
Special Hen
Joined
Oct 15, 2008
Messages
2,823
Reaction score
8,594
Location
Newkirk
I need a detailed drawing showing where to drill the trigger pin holes and safety level hole on an 80% lower. Or if anyone has a jig I could borrow or rent. My lower is aluminum. Thanks.
I have a jig you can use. Im in Newkirk, not far from ya. Just get with me sometime & come up & we can drill it out.
 

Latest posts

Top Bottom