Precision (small) AR500 gongs

[Timmy59]

Shootingtargets7 has the small precision gongs 50% off, I picked up 10-3/8" thick 3"gongs for $51.75 or $5.18 each shipped.. The 3/8 will handle anything I've got to throw at it and even .22 will make them dance.. Coupon code is PG..
https://shootingtargets7.com/steel-targets/gongs/3-8/3-ar500-gong.html

 

[MacFromOK]

Sweet! Just got 6 for $33.81 shipped (approx 5.64 ea, -$26.91 discount with the code).

Thanks for posting this!

 

[Cowcatcher]

Timmy, you're staying hooked up huntin the deals it seems!

 

[MacFromOK]

SHOOTING DISTANCES

* RIFLES over 2850fps back up so bullet speed is BELOW 2850fps at target.
(50 yd minimum with slower rifle rounds)
* PISTOLS 10yd minimum

GOLDEN RULES

* DO NOT use ammo with steel in or on it
* * Speed must be BELOW 2850fps at target to avoid pitting

Here's their selection page, with charts and more useful info:
https://shootingtargets7.com/selection

 

[dennishoddy]

SHOOTING DISTANCES

* RIFLES over 2850fps back up so bullet speed is BELOW 2850fps at target.
(50 yd minimum with slower rifle rounds)
* PISTOLS 10yd minimum

GOLDEN RULES

* DO NOT use ammo with steel in or on it
* * Speed must be BELOW 2850fps at target to avoid pitting

Here's their selection page, with charts and more useful info:
https://shootingtargets7.com/selection

Very important info there about velocity, etc. [emoji106]

 

[Timmy59]

Timmy, you're staying hooked up huntin the deals it seems!

Likely the reason I'm constantly broke LOL, I like to shop for goodies..

 

[Timmy59]

SHOOTING DISTANCES

* RIFLES over 2850fps back up so bullet speed is BELOW 2850fps at target.
(50 yd minimum with slower rifle rounds)
* PISTOLS 10yd minimum

GOLDEN RULES

* DO NOT use ammo with steel in or on it
* * Speed must be BELOW 2850fps at target to avoid pitting

Here's their selection page, with charts and more useful info:
https://shootingtargets7.com/selection

Mine are all hung and if their large enough to have 2 holes they hang at about a 25 degree, that's accomplished by the hanging strap / chain at the far end of the bolt with numerous nuts and washers to permit such.. These little ones I do not set that way although I might look into doing such..