S.Potts Custom Knives

randallss7

Sharpshooter
Joined
Aug 14, 2012
Messages
547
Reaction score
64
Location
Purcell
Fresh off the bench an order fulfillment for a good repeat customer.

8" total
3 1/8" blade @ 3/16 stock thickness of 1095 high carbon steel with a full flat grind
handle is 416 stainless bolster, scales are black linen micarta with red g-10 liners, and nickel silver and copper Mosaic pins.




 

randallss7

Sharpshooter
Joined
Aug 14, 2012
Messages
547
Reaction score
64
Location
Purcell
Stocking stuffer...6 1/8" small game skinner/EDC, blade is made from 0-1 tool steel, handle is ironwood with copper and nickel silver Mosaic pins and tube.


6 1/8" total
blade is 2 3/8" from 1/8" stock thickness 0-1 tool steel full flat grind.
handle is ironwood with two 7/32 Mosaic pins and one 7/32" Mosaic lanyard tube, then 5 1/16 nickel silver pins.
sheath 8-9 oz leather hand stamped with basic basket weave and rope border.



 

randallss7

Sharpshooter
Joined
Aug 14, 2012
Messages
547
Reaction score
64
Location
Purcell
A pair of 8" Alabama Damascus hunters for Father and Son, just in time or Christmas.

8" total
blade is 3 3/8"
handles are stabilized mesquite, with 416 stainless bolsters and copper/nickel silver Mosaic pins.




 

randallss7

Sharpshooter
Joined
Aug 14, 2012
Messages
547
Reaction score
64
Location
Purcell
8 3/4 OAL
blade is 4 1/4" at 5/32" stock thickness.
Handle is stabilized Mesquite burl with 416 stainless bolster with copper/nickel silver Mosaic pins
sheath is 8-9 oz leather, double stitched and dyed saddle tan.




 

randallss7

Sharpshooter
Joined
Aug 14, 2012
Messages
547
Reaction score
64
Location
Purcell
1st up is a 7 3/4" hunter in Alabama Damascus and stabilized black Ash burl

7 3/4" total
3 1/4" blade @ 5/32 stock thickness Alabama Damascus
handle is stabilized Black Ash Burl, brass bolster, blue g-10 stacking, with brass Mosaic pins
sheath is 8-90z tanned leather dyed saddle tan, simple barb wire border.





2nd up to bat 9 1/2" hunter in cmp154cm and lava flow Kirinite

9 1/2" OAL
blade is 4 1/4" @ 3/16" stock thickness cmps154cm with sand blasted finish
handle is lava flow Kirinite with eleven 1/16" nickel silver pins and one 1/4" nickel lanyard tube
sheath is 8-9oz leather dyed black simple barb wire border.





3rd is a semi forged knife, I like to say that because the knife was generally shaped via forging but completely finished on belt grinder, as it was created from an odd scrap of steel I had laying in the bone pile. Any way this one is 1095 hc clay quenched and acid etched.

8 3/4 OAL
blade is 3 1/2" clay quenched and acid etched to bring out Hamon
handle is elk horn with copper bolster
sheath is 8-8oz leather dyed saddle tan.



 
Top Bottom