1. Welcome to Oklahoma Shooters Association! Join today, registration is easy!

    You can register using your Google, Facebook, or Twitter account, just click here.

SBR Question

Discussion in 'NFA & Class III Discussion' started by twofifty, Jun 15, 2010.

  1. twofifty

    twofifty Marksman

    Messages:
    27
    Likes Received:
    0
    Joined:
    Feb 7, 2010
    Location:
    OKC
    I am going to get a SBR. Do you get the stamp first or pay for the rifle first?

    Thanks in advance.
     
  2. WhiteyMacD

    WhiteyMacD Sharpshooter

    Messages:
    8,170
    Likes Received:
    52
    Joined:
    May 11, 2009
    Location:
    Mustang
    Buying a built rifle then cutting her down?

    Buy rifle (you need the Serial on the receiver)
    Pay stamp
    Get stamp back
    engrave
    cut barrel.

    If not buying a full rifle it doesnt matter. All you need to know is that you need the receiver w/ the serial. That goes on your paperwork. Fill out your forms and send off with your check. Wait for it to come back, then get the receiver engraved. Then "build" the SB part of the SBR. (if building from parts, make sure your barrel is at least the minimum for standard rifle until you get a stamp back)
     
  3. twofifty

    twofifty Marksman

    Messages:
    27
    Likes Received:
    0
    Joined:
    Feb 7, 2010
    Location:
    OKC
    So if I buy a Noveske 10.5" CQB 5.56mm I would pay for the rifle first and start the forms at the same time?

    Thanks again ... new to the NFA stuff.
     
  4. WhiteyMacD

    WhiteyMacD Sharpshooter

    Messages:
    8,170
    Likes Received:
    52
    Joined:
    May 11, 2009
    Location:
    Mustang
    If you bought a Noveske 10.5 (full rifle), it would be under a Form 4.

    I think you purchase the rifle, which has to be transfered to a c3 dealer in your area, then the paper work is filled out and sent. Once received (form approved/stamp), your local C3 dealer would release it to you.

    I could be wrong. I've never form4ed a full rifle that wasnt "built" by my local C3.
     
  5. twofifty

    twofifty Marksman

    Messages:
    27
    Likes Received:
    0
    Joined:
    Feb 7, 2010
    Location:
    OKC
    Thanks for the info ... this will get me started.
     

Share This Page