Forums
New posts
Search forums
What's new
New posts
New media
New media comments
Latest activity
Classifieds
Media
New media
New comments
Search media
Log in
Register
What's New?
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Navigation
Install the app
Install
More Options
Advertise with us
Contact Us
Close Menu
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Forums
The Range
Rifle & Shotgun Discussion
Scope question on a Steyr Mannlicher
Search titles only
By:
Reply to Thread
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="Ians 17/22" data-source="post: 3912958" data-attributes="member: 51816"><p>O.K. , i understand your problem , many guys used "Lock-tite" on those screws , did U C evidence of it on the rear mount screws ?? ( just curious).....to get them out , U may try applying a bit of KROIL to the stuck screws , at least over-nite , then if possible give yourself a nice flat surface , then punch a dimple with a transfer punch or center punch so as to drill very carefully with a small left-hand drill , the stuck screw should come out..... the stuck ones assumed are the same dia. as the ones U removed , (a # 8 or 10).....#ed screws dia, = as # 8 x 13 + 60 = Dia,,,,,always works , # of screw X number 13 plus constant of 60 + Dia,.....</p></blockquote><p></p>
[QUOTE="Ians 17/22, post: 3912958, member: 51816"] O.K. , i understand your problem , many guys used "Lock-tite" on those screws , did U C evidence of it on the rear mount screws ?? ( just curious).....to get them out , U may try applying a bit of KROIL to the stuck screws , at least over-nite , then if possible give yourself a nice flat surface , then punch a dimple with a transfer punch or center punch so as to drill very carefully with a small left-hand drill , the stuck screw should come out..... the stuck ones assumed are the same dia. as the ones U removed , (a # 8 or 10).....#ed screws dia, = as # 8 x 13 + 60 = Dia,,,,,always works , # of screw X number 13 plus constant of 60 + Dia,..... [/QUOTE]
Insert Quotes…
Verification
Post Reply
Forums
The Range
Rifle & Shotgun Discussion
Scope question on a Steyr Mannlicher
Search titles only
By:
Top
Bottom