I have too many steps to make a progressive work
Step 1. and 2
Deprime and pin tumble.
Step 3 and 4
Brush inside necks with spinning brush and lube inside and out.
Step 5
Full length size.
step 6
Clean off lube with rag on outside case and with Qtip inside the neck.
Step 7 and 8
Trim and "Lightly" chamfer.
Step 9
brush inside necks with spinning brush again.
step 10
measure inside diameter of necks and check for runout and smoothness of inside neck.
Step 11
Prime cases.
Some steps left out like letting cases dry and sorting cases.
Now i can place in my loading blocks and measure the powder from my modded 505 scale.
Then seat the bullet ever so carefully..
Seat just a tad then turn case and seat further then one more turning of the case and seat the rest of the way.
How accurate is your progressive ammo at 200-300 yards.
I have found 100 yards with slapped together stuff can make 1" groups
But to keep that 1" at 200 ???
Step 1. and 2
Deprime and pin tumble.
Step 3 and 4
Brush inside necks with spinning brush and lube inside and out.
Step 5
Full length size.
step 6
Clean off lube with rag on outside case and with Qtip inside the neck.
Step 7 and 8
Trim and "Lightly" chamfer.
Step 9
brush inside necks with spinning brush again.
step 10
measure inside diameter of necks and check for runout and smoothness of inside neck.
Step 11
Prime cases.
Some steps left out like letting cases dry and sorting cases.
Now i can place in my loading blocks and measure the powder from my modded 505 scale.
Then seat the bullet ever so carefully..
Seat just a tad then turn case and seat further then one more turning of the case and seat the rest of the way.
How accurate is your progressive ammo at 200-300 yards.
I have found 100 yards with slapped together stuff can make 1" groups
But to keep that 1" at 200 ???