Name and license # on stringer

[swampratt]

I read the rules as Dennis pointed out and you must have your name and license # on your fish..
I assume this means on your basket or stringer that contains your fish.

So I have made these stringers for friends as my dad made one years ago .
You guys probably have the same stuff laying around.

1/4" soft copper tubing and parachute cord or other line that would work.

Stick cord into deburred end of copper about 4" into the copper. Flatten with a hammer. Cut end off at an angle to create a point.
Take engraver or metal stamp set and engrave your information on it.

 

[chazroh]

Great idea, gonna have to do this

 

[dennishoddy]

I've got one exactly like that except the tubing is stainless steel. Good Idea on the engraving.

 

[r00s7a]

Thats what we always used noodlin. Sharpen them up good so you can quickly jam them through a jaw before you run out of air.

 

[dennishoddy]

This is mine. We had to fish off a 20' wall below Kaw, so needed a long stringer.