Suppressor adaptor for non threaded barrel?

[dlbleak]

I’ve got a CZ 457 with a standard barrel. I would like to use my can on it and have been looking at adaptors. eBay has some cheapies for less than 12 bucks but I want better quality than that. I found a company that makes brand specific adaptors but I didn’t see CZ listed. I think it was Infinite Inc. or something like that. So, what companies do I need to look at or contact?

 

[BobbyV]

What brand/model of suppressor do you have? As long as the thread pattern works on your barrel and the adaptor fits your suppressor you should be fine.

 

[dlbleak]

It’s a Gemtech Outback. I guess I should have more specific. My barrel is not threaded on the 457. It’s in a Boyd’s At1 stock that I really like. Looking for a clamp on adaptor.

 

[BobbyV]

It’s a Gemtech Outback. I guess I should have more specific. My barrel is not threaded on the 457. It’s in a Boys At1 stock that I really like. Looking for a clamp on adaptor.

Something like this? Threaded Adapters

 

[dlbleak]

Yep, I looked at the Witt brand. It’s probably one of the better built ones out there. I was wondering if anyone had personal experience with any. I need to get some batteries for my calipers. One site had an adaptor specifically for a .625 barrel. Pretty sure that’s what mine is going to measure.

 

[rickm]

Maybe it is just me and dont know what im thinking about but i was always afraid of using something like that due to the fact of perfect alignment so dont get baffle strikes and destroy the can.

 

[dlbleak]

Maybe it is just me and dont know what im thinking about but i was always afraid of using something like that due to the fact of perfect alignment so dont get baffle strikes and destroy the can.

I’m a little concerned about that also. That’s the main reason I’m asking about personal experiences.

 

[MacFromOK]

Maybe it is just me and dont know what im thinking about but i was always afraid of using something like that due to the fact of perfect alignment so dont get baffle strikes and destroy the can.

If machined properly, it should be just as aligned as properly cut threads. The danger (if any, IMO) would be if the clamp bolts loosen...
___

 

[mr ed]

They are fine if shooting a 22 thru a 9mm suppressor. 22 thru a 22 not so much.
You need a real straight piece of long drill rod about .215 in diameter to stick in from breach, out muzzle and thru suppressor to see if it contacts anything.

 

[Duncandl]

https://geissele.com/15-5-56mm-suppressor-alignment-gage.html
These work great, I tinkered around with mine more than I ever thought I would.