Forums
New posts
Search forums
What's new
New posts
New media
New media comments
Latest activity
Classifieds
Media
New media
New comments
Search media
Log in
Register
What's New?
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Navigation
Install the app
Install
More Options
Advertise with us
Contact Us
Close Menu
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Forums
The Range
Ammo & Reloading
Dillon primer feed help
Search titles only
By:
Reply to Thread
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="ChrisC" data-source="post: 1054950" data-attributes="member: 190"><p>Thoroughly polish frame, wherever priming slide touches it, with green</p><p>Scotch Brite. (Approx. every 3000 rounds)</p><p></p><p>Wipe off Primer Slide with solvent or alcohol. Leave it all dry.</p><p></p><p>At rest primer slide adjustment: Set so that one primer, dropped down the</p><p>tube, goes all the way into the Primer Seating Cup, 10 times in a row.</p><p></p><p>Angle of Primer Slide Operating Rod (13869) - Release rod from rollers and</p><p>swivel it 180º so it's pointing straight up - it should be parallel with the</p><p>Primer Housing eld, or maybe outward "a little"; it should not be "inward"</p><p>at all.</p><p></p><p>Be sure both screws (14530) that tighten Roller Bracket Shell Platform</p><p>(14280) from bottom (to the Shellplate Platform) are tight!</p><p>Make sure Priming Seating Punch Assembly is fully bottomed out before</p><p>tightening screw (13996): Measured from bottom of Primer Slide (13920) to</p><p>top of seated Primer Seating Cup (13284/5), dimension should be between</p><p>2.125 - 2.220 inches.</p><p></p><p>Be sure Priming Operating Rod Bracket (13887) is adjusted so it's within a</p><p>few thousands of an inch from the top of frame/Toplhead.</p></blockquote><p></p>
[QUOTE="ChrisC, post: 1054950, member: 190"] Thoroughly polish frame, wherever priming slide touches it, with green Scotch Brite. (Approx. every 3000 rounds) Wipe off Primer Slide with solvent or alcohol. Leave it all dry. At rest primer slide adjustment: Set so that one primer, dropped down the tube, goes all the way into the Primer Seating Cup, 10 times in a row. Angle of Primer Slide Operating Rod (13869) - Release rod from rollers and swivel it 180º so it's pointing straight up - it should be parallel with the Primer Housing eld, or maybe outward "a little"; it should not be "inward" at all. Be sure both screws (14530) that tighten Roller Bracket Shell Platform (14280) from bottom (to the Shellplate Platform) are tight! Make sure Priming Seating Punch Assembly is fully bottomed out before tightening screw (13996): Measured from bottom of Primer Slide (13920) to top of seated Primer Seating Cup (13284/5), dimension should be between 2.125 - 2.220 inches. Be sure Priming Operating Rod Bracket (13887) is adjusted so it's within a few thousands of an inch from the top of frame/Toplhead. [/QUOTE]
Insert Quotes…
Verification
Post Reply
Forums
The Range
Ammo & Reloading
Dillon primer feed help
Search titles only
By:
Top
Bottom