Forums
New posts
Search forums
What's new
New posts
New media
New media comments
Latest activity
Classifieds
Media
New media
New comments
Search media
Log in
Register
What's New?
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Navigation
Install the app
Install
More Options
Advertise with us
Contact Us
Close Menu
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Forums
The Range
Rifle & Shotgun Discussion
encore barrel storage
Search titles only
By:
Reply to Thread
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="kdlong" data-source="post: 1060564" data-attributes="member: 5982"><p>i pulled the sheetrock out of the door and screwed a 1x4 behind it.then i put the sheetrock back in the door .then i took 1/4 in lag bolts about 3 inches long and screwed them into the sheetrock into the 1x4.then i cut the head off of the bolt and put a piece of 1/4 inch rubber fuel line on the bolt for coushin.when i hang the barrels, i just put the bolt inbetween the scope and base and let it slide down till it touches the scope ring.just make sure how much clearence you have between the scope and base so you can use the biggest bolt possible.also when you put the bolts in the door put them on an upward angle so the barrel will not slide off.hope this help figuring out how i did it.</p></blockquote><p></p>
[QUOTE="kdlong, post: 1060564, member: 5982"] i pulled the sheetrock out of the door and screwed a 1x4 behind it.then i put the sheetrock back in the door .then i took 1/4 in lag bolts about 3 inches long and screwed them into the sheetrock into the 1x4.then i cut the head off of the bolt and put a piece of 1/4 inch rubber fuel line on the bolt for coushin.when i hang the barrels, i just put the bolt inbetween the scope and base and let it slide down till it touches the scope ring.just make sure how much clearence you have between the scope and base so you can use the biggest bolt possible.also when you put the bolts in the door put them on an upward angle so the barrel will not slide off.hope this help figuring out how i did it. [/QUOTE]
Insert Quotes…
Verification
Post Reply
Forums
The Range
Rifle & Shotgun Discussion
encore barrel storage
Search titles only
By:
Top
Bottom