- Caliber
- 32 special
- Location
- Oakwood, 73724, Oklahoma, United States
T
Last edited:
-
If you have bought, sold or gained information from our Classifieds, please donate to OKShooters Association and give back.
You can become a Supporting Member
Isn't that middle hole the lever pin plug screw? Think I'd put one in there just to avoid any issues.
I don’t think there’s supposed to be a screw in it, none of those holes affect or impact function. They were part of the scope mounting system.
The big screw is MIA. It probably was replaced with a new one for the mount and then when the mount left, so did the screw. 
The shaved screw might not be shaved. After looking at prolly 120 or so pics of the left side of W94s, they are all different, showing a screw, or the end of a pin, or the flattened out looking thing like yours. Big screw is definitely missing.
The shaved screw might not be shaved. After looking at prolly 120 or so pics of the left side of W94s, they are all different, showing a screw, or the end of a pin, or the flattened out looking thing like yours. Big screw is definitely missing.
Last edited:
Yeah they sit proud of the receiver ever so slightly usually, probably took it put so the mount would sit flat. It's what keeps the lever pin from possibly falling out. Definitely a must have if you're gonna use it at all.
Good job Jev, you put the work in I didn't want to do. But I believe you're 100% correct. Easy fix, assuming you can extract that other one easily and replace it. Careful drill and ez out job should do it.The big screw is MIA. It probably was replaced with a new one for the mount and then when the mount left, so did the screw.
View attachment 322892View attachment 322893
The shaved screw might not be shaved. After looking at prolly 120 or so pics of the left side of W94s, they are all different, showing a screw, or the end of a pin, or the flattened out looking thing like yours. Big screw is definitely missing.
