Forums
New posts
Search forums
What's new
New posts
New media
New media comments
Latest activity
Classifieds
Media
New media
New comments
Search media
Log in
Register
What's New?
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Navigation
Install the app
Install
More Options
Advertise with us
Contact Us
Close Menu
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Forums
Competition, Tactics & Training
Gun Club/Range Talk
Headed to Lexington gun range
Search titles only
By:
Reply to Thread
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="swampratt" data-source="post: 2985674" data-attributes="member: 15054"><p>I have a 100atr 30-06.. kicks like a mule.</p><p>I use 52.5gr IMR 4064 and 150gr flat base bullets in annealed R-P cases and CCI 200 primers.</p><p>Another load is in the same cases with BR2 primers setting off 53gr of 4064 with 155A-Max set at 3.280" for 2980 FPS.</p><p>Those loads were worked up in my gun and will shoot MOA or better out to 500 yards.</p><p></p><p>Many of my 100 yard groups are in the .75" area and then take it to 200 and get the same .75" or tighter group.</p><p>Weather or I should say temperature does not adversely affect the group size with that powder in that load range.</p><p></p><p>Necks are VLD chamfered and are all brushed with a clean spinning nylon brush then swabbed with a Qtip before seating a bullet.</p><p></p><p>Neck Id is held at .002" smaller than bullet diameter.</p><p>Sort cases by Neck ID for best groups.</p><p></p><p>That is all I got for your 100 ATR</p><p></p><p>Another bullet that is not real finicky is the 165 game king HP BT. long bearing surface No lead exposed on the tip.</p><p>Puts down every deer and coon I shot with it.</p></blockquote><p></p>
[QUOTE="swampratt, post: 2985674, member: 15054"] I have a 100atr 30-06.. kicks like a mule. I use 52.5gr IMR 4064 and 150gr flat base bullets in annealed R-P cases and CCI 200 primers. Another load is in the same cases with BR2 primers setting off 53gr of 4064 with 155A-Max set at 3.280" for 2980 FPS. Those loads were worked up in my gun and will shoot MOA or better out to 500 yards. Many of my 100 yard groups are in the .75" area and then take it to 200 and get the same .75" or tighter group. Weather or I should say temperature does not adversely affect the group size with that powder in that load range. Necks are VLD chamfered and are all brushed with a clean spinning nylon brush then swabbed with a Qtip before seating a bullet. Neck Id is held at .002" smaller than bullet diameter. Sort cases by Neck ID for best groups. That is all I got for your 100 ATR Another bullet that is not real finicky is the 165 game king HP BT. long bearing surface No lead exposed on the tip. Puts down every deer and coon I shot with it. [/QUOTE]
Insert Quotes…
Verification
Post Reply
Forums
Competition, Tactics & Training
Gun Club/Range Talk
Headed to Lexington gun range
Search titles only
By:
Top
Bottom