Forums
New posts
Search forums
What's new
New posts
New media
New media comments
Latest activity
Classifieds
Media
New media
New comments
Search media
Log in
Register
What's New?
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Navigation
Install the app
Install
More Options
Advertise with us
Contact Us
Close Menu
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Forums
The Range
Rimfire Weapons
I messed something up! Help Please
Search titles only
By:
Reply to Thread
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="dieseltech09" data-source="post: 1209978" data-attributes="member: 9783"><p>So last night I decided to strip my MKIII down for the first time. I had a very hard time getting the mainspring housing up and while trying to pull it down to remove the bolt retaining pin I could only get it about half way down. I decided I was going to wait till I had more time this weekend.I was having a hard time getting the bolt retaining pin pushed back through so I cycled the bolt, this is where Im sure I messed up. I got the pin back through and the main spring housing back down. Now the bolt will only move about 1/4 of the way back and I now I can only get the main spring housing up a little bit before it gets tight.</p><p>What do I need to do? And how bad did I mess up?</p></blockquote><p></p>
[QUOTE="dieseltech09, post: 1209978, member: 9783"] So last night I decided to strip my MKIII down for the first time. I had a very hard time getting the mainspring housing up and while trying to pull it down to remove the bolt retaining pin I could only get it about half way down. I decided I was going to wait till I had more time this weekend.I was having a hard time getting the bolt retaining pin pushed back through so I cycled the bolt, this is where Im sure I messed up. I got the pin back through and the main spring housing back down. Now the bolt will only move about 1/4 of the way back and I now I can only get the main spring housing up a little bit before it gets tight. What do I need to do? And how bad did I mess up? [/QUOTE]
Insert Quotes…
Verification
Post Reply
Forums
The Range
Rimfire Weapons
I messed something up! Help Please
Search titles only
By:
Top
Bottom