Forums
New posts
Search forums
What's new
New posts
New media
New media comments
Latest activity
Classifieds
Media
New media
New comments
Search media
Log in
Register
What's New?
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Navigation
Install the app
Install
More Options
Advertise with us
Contact Us
Close Menu
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Forums
The Range
Rimfire Weapons
I messed something up! Help Please
Search titles only
By:
Reply to Thread
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="Cue" data-source="post: 1210173" data-attributes="member: 1708"><p>Pull the trigger while removing the mainspring housing. Your hammer strut is not aligned right. You need to point the barrel straight up.Once you got the mainspring in the 45 degree angle,you wiggle the gun a little. It will fall back into the little recess on the back side of the main spring housing. Then you can either remove the mainspring or put it back together. If it is brand new, you may have to take a hammer and a nylon punch to the bolt stop pin to drive it out. </p><p></p><p>Also make sure you have the magazine in there if you have not disabled the mag safety.</p></blockquote><p></p>
[QUOTE="Cue, post: 1210173, member: 1708"] Pull the trigger while removing the mainspring housing. Your hammer strut is not aligned right. You need to point the barrel straight up.Once you got the mainspring in the 45 degree angle,you wiggle the gun a little. It will fall back into the little recess on the back side of the main spring housing. Then you can either remove the mainspring or put it back together. If it is brand new, you may have to take a hammer and a nylon punch to the bolt stop pin to drive it out. Also make sure you have the magazine in there if you have not disabled the mag safety. [/QUOTE]
Insert Quotes…
Verification
Post Reply
Forums
The Range
Rimfire Weapons
I messed something up! Help Please
Search titles only
By:
Top
Bottom