Forums
New posts
Search forums
What's new
New posts
New media
New media comments
Latest activity
Classifieds
Media
New media
New comments
Search media
Log in
Register
What's New?
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Navigation
Install the app
Install
More Options
Advertise with us
Contact Us
Close Menu
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Forums
The Range
Ammo & Reloading
Is is my imagination or is Brass getting Hard to come by
Search titles only
By:
Reply to Thread
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="swampratt" data-source="post: 2068220" data-attributes="member: 15054"><p>use imperial sizing die wax inside the necks with a Qtip and same wax on the outside .</p><p>I have used and sized steel 45acp cases no issues..but carbide dies..</p><p>Make sure the steel is very clean inside and out and there should be no extra stress on the dies.</p><p>If you fired this steel from your gun..maybe a neck sizing will be sufficient.</p><p>Some steel wool size 0000 on a bore brush will clean inside of necks really well if there is carbon stuck inside them.</p><p>If there is carbon outside the cases..remove all that before sending them into a die...</p><p>0000 wool will work on outside also ...if tumbling does not get it all....And blow all the steel wool off the case..</p><p></p><p>I am now saving all my 270 brass i pick up..convert it to 30-06 or .243..or .308 as i have those but do not have a 270.</p><p>Yes i am hording all my brass..</p></blockquote><p></p>
[QUOTE="swampratt, post: 2068220, member: 15054"] use imperial sizing die wax inside the necks with a Qtip and same wax on the outside . I have used and sized steel 45acp cases no issues..but carbide dies.. Make sure the steel is very clean inside and out and there should be no extra stress on the dies. If you fired this steel from your gun..maybe a neck sizing will be sufficient. Some steel wool size 0000 on a bore brush will clean inside of necks really well if there is carbon stuck inside them. If there is carbon outside the cases..remove all that before sending them into a die... 0000 wool will work on outside also ...if tumbling does not get it all....And blow all the steel wool off the case.. I am now saving all my 270 brass i pick up..convert it to 30-06 or .243..or .308 as i have those but do not have a 270. Yes i am hording all my brass.. [/QUOTE]
Insert Quotes…
Verification
Post Reply
Forums
The Range
Ammo & Reloading
Is is my imagination or is Brass getting Hard to come by
Search titles only
By:
Top
Bottom