LRB medium weight national match M14 has landed

[1shott]

Oh what a gorgeous rifle it is.

LRB NM forged receiver.
22in med SAK 1/12 CM NON cl barrel
reclaimed USGI HR bolt
new NM flash hider, reamed
unitized gas, new
NM front and rear sight with .595 aperture
Boyds walnut M1A stock with new metal

Just a few of the specs from the build.

Looking forward to a range trip soon.

 

[1shott]

Included a challenge coin

 

[ark-and-spark]

Nice rifle.

 

[BillM]

Oh what a gorgeous rifle it is.

LRB NM forged receiver.
22in med SAK 1/12 CM NON cl barrel
reclaimed USGI HR bolt
new NM flash hider, reamed
unitized gas, new
NM front and rear sight with .595 aperture
Boyds walnut M1A stock with new metal

Just a few of the specs from the build.

Looking forward to a range trip soon. View attachment 380614View attachment 380615View attachment 380616View attachment 380617View attachment 380618View attachment 380619View attachment 380620

Sorry, can't type much, too busy drooling!

 

[KurtM]

Beautiful rifle! Is it also bedded? Keep track of where your bolt hold open round goes compared to the rest of your group. That can tell you a bunch about the rifle. Also if bedded, don't take it apart too often, and when you do put a little synthetic grease between the ferrel and the stock front metal. Once you take it fully apart, if bedded, it will take 30 or so rounds to settle back down. You can still do maintenance of the gas system without removing it from the stock, and still oil the op rod. Torque your gas cylinder plug to about 15 # and check it regularly. You are going to be one happy camper!!!!

 

[bigred1]

What does LRB stand for?

 

[gerhard1]

Nice!!!

A service-grade would make me happy.

 

[1shott]

Beautiful rifle! Is it also bedded? Keep track of where your bolt hold open round goes compared to the rest of your group. That can tell you a bunch about the rifle. Also if bedded, don't take it apart too often, and when you do put a little synthetic grease between the ferrel and the stock front metal. Once you take it fully apart, if bedded, it will take 30 or so rounds to settle back down. You can still do maintenance of the gas system without removing it from the stock, and still oil the op rod. Torque your gas cylinder plug to about 15 # and check it regularly. You are going to be one happy camper!!!!

Not bedded

The function test target is very promising

 

[JEVapa]

What does LRB stand for?

I've been looking and can't find anything. Maybe Little Round Boy or something? Or Little River Band?
Maybe I'll email them.

 

[1shott]

What does LRB stand for?

The manufacture

LRB Arms Long Island Ny.