Mossberg Forend wrench

[SDarkRage]

Need to borrow someones forend wrench to change out the forend on a 590A1 that I'm installing a Knoxx stock on. Thanks.

 

[SDarkRage]

Nobody wants to help me?

 

[grwd]

I can, but all Ill be giving you is a big screwdriver and a rubber mallet.

 

[Davs2601]

Thats what i used also. Mine came off easy

 

[SDarkRage]

I was going to try that but I can't get the magazine tube off to do it. I also can't get the trigger group out to get the whole slide off the gun.

 

[Davs2601]

Last time I cleaned my moss 500 my trigger group was tight and tough to get out. I finally got a little irritated and yanked it out. Unless you get the trigger group out you will never be able to properly clean it. I think I had to pull mine down and forward to get it to pop. maybe a little oil will help

 

[SDarkRage]

Last time I cleaned my moss 500 my trigger group was tight and tough to get out. I finally got a little irritated and yanked it out. Unless you get the trigger group out you will never be able to properly clean it. I think I had to pull mine down and forward to get it to pop. maybe a little oil will help

I can't get the takedown pin out of it.

 

[Davs2601]

I think its just a tension wire that holds it in there. I would get a bigger hammer and hope for the best.