Forums
New posts
Search forums
What's new
New posts
New media
New media comments
Latest activity
Classifieds
Media
New media
New comments
Search media
Log in
Register
What's New?
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Navigation
Install the app
Install
More Options
Advertise with us
Contact Us
Close Menu
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Forums
The Range
Ammo & Reloading
Playing with subs again
Search titles only
By:
Reply to Thread
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="swampratt" data-source="post: 3940552" data-attributes="member: 15054"><p>I got some velocity numbers from my .308 with 100gr cast Powder coated bullets.</p><p>Lee 32-20 100 gr mold.</p><p>Red Dot powder, CCI 200 primers and 308 bolt gun.</p><p></p><p>I use a lee dipper and trickle powder into it and card it off . </p><p></p><p>.3cc = 2.0 gr and 664 FPS.</p><p>.5cc= 4.6 gr and 983 FPS.</p><p></p><p></p><p>Shoot them suppressed and very quiet to the point of the projectile hitting target is more than the report.</p><p></p><p>The .3cc load you will not need to resize the brass at all just brush it, deprime and load it.</p><p>The neck expands to .310" diameter with the .5cc load so you will need to pinch it back down.</p><p></p><p>My necks are turned and I set ID at .306" with a slight flare.</p><p></p><p>I just wanted to see if my .5cc load would open the case necks and I wanted to check velocity.</p><p>I have shot hundreds of the .3cc load and it is just too fun and easy to reload with a wack-a-mole technique .</p></blockquote><p></p>
[QUOTE="swampratt, post: 3940552, member: 15054"] I got some velocity numbers from my .308 with 100gr cast Powder coated bullets. Lee 32-20 100 gr mold. Red Dot powder, CCI 200 primers and 308 bolt gun. I use a lee dipper and trickle powder into it and card it off . .3cc = 2.0 gr and 664 FPS. .5cc= 4.6 gr and 983 FPS. Shoot them suppressed and very quiet to the point of the projectile hitting target is more than the report. The .3cc load you will not need to resize the brass at all just brush it, deprime and load it. The neck expands to .310" diameter with the .5cc load so you will need to pinch it back down. My necks are turned and I set ID at .306" with a slight flare. I just wanted to see if my .5cc load would open the case necks and I wanted to check velocity. I have shot hundreds of the .3cc load and it is just too fun and easy to reload with a wack-a-mole technique . [/QUOTE]
Insert Quotes…
Verification
Post Reply
Forums
The Range
Ammo & Reloading
Playing with subs again
Search titles only
By:
Top
Bottom