Forums
New posts
Search forums
What's new
New posts
New media
New media comments
Latest activity
Classifieds
Media
New media
New comments
Search media
Log in
Register
What's New?
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Navigation
Install the app
Install
More Options
Advertise with us
Contact Us
Close Menu
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Forums
The Range
Ammo & Reloading
Setting up Hornady FL sizing die
Search titles only
By:
Reply to Thread
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="Rmitch223" data-source="post: 2001454" data-attributes="member: 1005"><p>the shoulder bump can be measured with a headspace gauge that attaches to digital calipers correct?</p><p></p><p>I started resizing 10 cases last week when I got a case stuck in the resizing die. I was using Hornady one shot case lube that I didnt let dry long enough and the 11th case got stuck in the die. The die is currently at hornady having the case removed and the die inspected and polished.</p><p></p><p>Meanwhile I tried chambering the cases I sized. They all were very tight and it was fairly hard to close the bolt. Im assuming that because of lack of lubricant the neck expander pulled the shoulder up when the ram was lowering. I chambered a brand new unsized brass no problem, so I'm thinking I either set up the FL die incorrectly or like I said the neck expander pulled the shoulder up due to lack of lubrication. Im really not sure.</p></blockquote><p></p>
[QUOTE="Rmitch223, post: 2001454, member: 1005"] the shoulder bump can be measured with a headspace gauge that attaches to digital calipers correct? I started resizing 10 cases last week when I got a case stuck in the resizing die. I was using Hornady one shot case lube that I didnt let dry long enough and the 11th case got stuck in the die. The die is currently at hornady having the case removed and the die inspected and polished. Meanwhile I tried chambering the cases I sized. They all were very tight and it was fairly hard to close the bolt. Im assuming that because of lack of lubricant the neck expander pulled the shoulder up when the ram was lowering. I chambered a brand new unsized brass no problem, so I'm thinking I either set up the FL die incorrectly or like I said the neck expander pulled the shoulder up due to lack of lubrication. Im really not sure. [/QUOTE]
Insert Quotes…
Verification
Post Reply
Forums
The Range
Ammo & Reloading
Setting up Hornady FL sizing die
Search titles only
By:
Top
Bottom