Anybody get anything cool that is gun-related today?

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

454308

Sharpshooter
Supporting Member
Special Hen Supporter
Joined
Jul 1, 2010
Messages
992
Reaction score
83
Location
Midwest City
I went into Wal Mart after I voted,,,
Found a lot of .22 ammo on the shelves.

Eight-325 round bulk packs of Federal Auto Match,,,
Are now in the trunk of my car.

Stopped into Atwood's just to see if they had any ammo,,,
No ammo but I did discover that they now carry my favorite target stand.

These ReVersa target stands have worked very well for me,,,
Mine are two years old now and have stood up to a lot of use.

70750001.png


Mine are the 52" versions,,,
I know they don't look like much,,,
But they hold any cardboard very well.

I just cut up a cardboard box,,,
Then tape, glue, or staple any paper target to it.

This stand holds them steady even in a stiff Oklahoma breeze.

Aarond

.
Best target stands I've found

Sent from my SM-G973U using Tapatalk
 

thor447

Sharpshooter
Supporting Member
Special Hen Supporter
Joined
Sep 1, 2012
Messages
5,210
Reaction score
13,111
Location
Newcastle
I'll hopefully be picking up a Walther PPS M2 LE (non-recall) later today. Hopefully it goes through and I'll have pics to share soon.
 
Last edited:

thor447

Sharpshooter
Supporting Member
Special Hen Supporter
Joined
Sep 1, 2012
Messages
5,210
Reaction score
13,111
Location
Newcastle
Ya big old tease..
Here you go Rocky!

I met up with the guy, and it was a pretty quick visit. All function tests were OK, so we did the deal and I went home. When I got here, I opened this puppy up, and man was she dirty. I mean DIRTY!!! A quick online lesson on how to do a full disassembly on the slide, 2 sonic baths, compressed air dry, and a little lube, and this baby is ready to go!!

I didn't take pics of the gun before it was cleaned. Mags weren't terrible, but I figured I might as well disassemble and thoroughly clean them as well:
mags dirty.JPG

Here's the pistol after the sonic cleaner and compressed air:
pistol cleaned.JPG

All lubed and assembled, ready to go!! She sure feels good in the hand. I'm going to try to get to a range tomorrow and put a box or two through it. My handloads pass the plunk test on this Walther barrel.
assembled.JPG

For the price I paid, I figure I couldn't really be upset about how dirty it was, but she is a looker now!!
 

bigred1

Sharpshooter
Supporting Member
Special Hen Supporter
Joined
Dec 8, 2015
Messages
10,717
Reaction score
20,049
Location
Lincoln county
Here you go Rocky!

I met up with the guy, and it was a pretty quick visit. All function tests were OK, so we did the deal and I went home. When I got here, I opened this puppy up, and man was she dirty. I mean DIRTY!!! A quick online lesson on how to do a full disassembly on the slide, 2 sonic baths, compressed air dry, and a little lube, and this baby is ready to go!!

I didn't take pics of the gun before it was cleaned. Mags weren't terrible, but I figured I might as well disassemble and thoroughly clean them as well:
View attachment 179614

Here's the pistol after the sonic cleaner and compressed air:
View attachment 179615

All lubed and assembled, ready to go!! She sure feels good in the hand. I'm going to try to get to a range tomorrow and put a box or two through it. My handloads pass the plunk test on this Walther barrel.
View attachment 179613

For the price I paid, I figure I couldn't really be upset about how dirty it was, but she is a looker now!!
Saaaweet!
 

Latest posts

Top Bottom