On-Board Illumination for Your Reloading Press

[Old Fart]

Just thought a few of you might enjoy this and find it useful.

http://www.brownells.com/.aspx/lid=...1&spJobID=384054183&spReportId=Mzg0MDU0MTgzS0

 

[Old Fart]

Yup, this is just a simple fix. Duct tape and a flexible neck flashlight.

 

[Fyrtwuck]

A company named in-line fabrication has some pretty cool LED strip light set ups. They have a website.

 

[Oklahomabassin]

I have a 4' twin tube light bar over my reloading bench.

 

[FreeSpiritBalloon]

I got the flexible LED strip from radio shack to put inside the press frame that works great.


Sent from my iPhone using Tapatalk

 

[Sanford]

4 to 6 inch LED strips from the bling section of your local KMart, WalMart, auto parts store, etc. work well too - just need a 12v DC supply to feed them with.

 

[Norman]

I just wrapped a $12 headlamp I use for running trot lines around my press

 

[okietom]

I bought an LED strip that came with a transformer, a switch, a Y, and. Light that fits in the hole in the center of my Dillon toolhead. The last light has a rubber o-ring that holds it up. All for $26 on ebay. I can see if there is powder in my pustol cases and. Primer in the primer seating punch while I work the lever on the press.

 

[W150]

I bought a flexible light at Walmart.
It's designed for use on sewing machine but works great on press.
Several different options at the link. Sometimes I wish I had bought an AC one instead of battery.

http://www.walmart.com/ip/Mighty-Bright-Sewing-Machine-LED-Light-Silver/25394029

I also want to make it clear I was in that section of the store because of my wife.

 

[Shriner]

I use the led lite made by someone here at OSA- he does the press counter thing