Savage Gun Stock Fitment

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

V98

Sharpshooter
Supporting Member
Special Hen Supporter
Joined
Mar 2, 2020
Messages
348
Reaction score
713
Location
Oklahoma
Do any of you have someone you would recommend to fit a laminate stock to a Savage Axis II 6.5 Creedmoor?

I bought a Monte Carlo Sporter stock from Sharp Shooter Supply and the bolt action is binding up when the front mounting bolt is tightened just a little. The stock is pillar bedded and it seems to fit up fine. I can’t figure it out so I’m looking for a pro to make it right.

(Sharp Shooter Supply - The Savage Specialists)

The people at Sharp Shooter are nice enough but it’s just a couple, they do not take phone calls and they’re overwhelmed with business. I also bought the improved extractor and I need to get it installed as well.

I’m in OKC and I’m looking for someone local. The west side would be even better. Thanks in advance for any suggestions!
 

Letfreedomring

Sharpshooter
Special Hen
Joined
Feb 21, 2022
Messages
2,433
Reaction score
6,463
Location
74053
It has been awhile since I've had a savage to compare, but are you sure the front screw isn't too long and interfering with the action? Can't remember if front screw goes all the way through receiver or not. Just trying to think of the simple stuff before going to drastic measures.😉
 

V98

Sharpshooter
Supporting Member
Special Hen Supporter
Joined
Mar 2, 2020
Messages
348
Reaction score
713
Location
Oklahoma
It has been awhile since I've had a savage to compare, but are you sure the front screw isn't too long and interfering with the action? Can't remember if front screw goes all the way through receiver or not. Just trying to think of the simple stuff before going to drastic measures.😉
Thanks I appreciate it but that’s not it. If the screw is completely loose or even out it does fine. Any little pressure at all it begins to bind. I suspect it has something to do with the way the recoil lug fits into the new stock.
 

Bocephus123

Sharpshooter
Special Hen
Joined
Nov 25, 2020
Messages
7,752
Reaction score
7,617
Location
Tulsa
usually the front screw on savage actions. take the bolt out screw it together shine light in action usually can see it... ive had same problem once or twice.. probably had 100 rifles or better in my life.!
 

Latest posts

Top Bottom