I am needing to replace the barrel on my Rifle.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

747yankee

Marksman
Special Hen
Joined
May 28, 2010
Messages
7
Reaction score
0
Location
N/A
Hello,

Im neew to the board and had a question for anboy in the know. I have a Remington 700ADL that needs a new barrel. Is is possible for me to replace the barrel or would i need a gun smith? I only ask because i dont have alot of money to be putting into it , but i kills me that i have a perfectly good gun just setting there.
 

angsniper

Sharpshooter
Joined
Mar 4, 2009
Messages
1,849
Reaction score
0
Location
Yukon
If you have the right tools and know what you are doing you can do it yourself. However, unless you are used to doing stuff like that most people wouldn't have all the necessary tools. If you buy the barrel it's not that expensive for a smith to rebarrel your rifle. I would contact Steve Baldwin at Mechanical Accuracy in Jones.
 

ez bake

Sharpshooter
Special Hen
Joined
Sep 22, 2005
Messages
11,535
Reaction score
0
Location
Tulsa Area
What caliber is it? I thought Steve would install a Hart for $300?

If you're interested in selling the gun (I'm only interested in the action - I'll replace the barrel/stock/recoil-lug/bolt-handle, etc...), send me a PM - I'm on the lookout for some spare parts to start another build.
 

mmchambers06

Sharpshooter
Special Hen
Joined
Aug 24, 2008
Messages
2,983
Reaction score
31
Location
OKC
If you're interested in selling the gun (I'm only interested in the action - I'll replace the barrel/stock/recoil-lug/bolt-handle, etc...), send me a PM - I'm on the lookout for some spare parts to start another build.

Heck...you might be better off financially selling it for the action and buying a new one if you're looking for a basic skinny model 700.

Contrary to popular belief you don't need a high dollar Hart barrel. ER Shaw will do the job for most of us!
 

HiredHand

Sharpshooter
Supporting Member
Special Hen Supporter
Joined
Sep 13, 2007
Messages
6,410
Reaction score
2,815
Location
Tulsa Metro
What caliber is it? I thought Steve would install a Hart for $300?

If you're interested in selling the gun (I'm only interested in the action - I'll replace the barrel/stock/recoil-lug/bolt-handle, etc...), send me a PM - I'm on the lookout for some spare parts to start another build.

Just spare parts? :spitlaugh
 
Joined
Apr 5, 2009
Messages
3,936
Reaction score
4
Location
Midwest City
This is one of those times when it's well worth it to pay the gunsmith to do it right; get the headspacing right; all that. That's what they do.

A Savage is simpler than most, but with Rem, though not complicated - you are much better off with a good gunsmith installing it - it won't cost all that much.
 

Latest posts

Top Bottom