Plexi-Glass fabrication

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Tyson C.

Sharpshooter
Special Hen
Joined
Nov 4, 2009
Messages
638
Reaction score
1
Location
perry
i have messed with it...also there is a shop here in Perry (Red Earth Dsign) that does laser etching. i know he can do the top etching but i can not remember if he can do the internal designs? here is his email if you are interested... [email protected] he is a memeber on here too can not remeber screen name.


how are you wanting the letters done? meaning; on top etched into the plexi or inside the plexi?

are you wanting the plexi bent or just a basic flat cut out design?

having plexing bent can get expensive.

i have included some samples. the K is top etched and the spider is enternal (gives it a 3d look)

View attachment top etch KICKER K.JPG

View attachment enternal etch 1.JPG

View attachment enternal etch 2.JPG

hope this helps some.
 

DPI

Sharpshooter
Special Hen
Joined
Aug 8, 2006
Messages
1,696
Reaction score
1
Location
Claremore
Engraving on top would be preferred. I have a picture of the letters and style I want. And I have a metal template for the size. No bending.
 

rapidsequence

Sharpshooter
Supporting Member
Special Hen Supporter
Joined
Jun 15, 2005
Messages
1,661
Reaction score
110
Location
Owasso
D-
I just had some HDPE and plexiglas cut for some new cages at Tulsa Plastics. They were outstanding. I dealt with a guy named Abe. They may be of assistance.
He even helped with some of the design and specs.
 

DPI

Sharpshooter
Special Hen
Joined
Aug 8, 2006
Messages
1,696
Reaction score
1
Location
Claremore
D-
I just had some HDPE and plexiglas cut for some new cages at Tulsa Plastics. They were outstanding. I dealt with a guy named Abe. They may be of assistance.
He even helped with some of the design and specs.

Thanks MDT, I'll give them a call.
 

Kozmos

Sharpshooter
Special Hen
Joined
Mar 27, 2008
Messages
316
Reaction score
3
Location
West Tulsa
Tulsa Plastics is great as is Plastics Engineering (Wanda). If you don't get anything going with them let me know, I'm sure I can get this done for you.
 

Latest posts

Top Bottom