I'm going to have to find/buy/build a reloading bench/whatever and I kind of like the rolling tool chest idea. I will look into this further.
Build one at 42” table top height. Barstool and standing. Gives room for shelves underneath. My first was steel solid core door. Door was NOT solid. Replaced top with scrap 2 bys. I put a thin plywood topper on the boards. Very sturdy. Using metal bars now for presses. Clamp the bars to table top and can now use the table for a project and cleaning bench.
Years ago I picked up a set of steel bench legs at Grainger and a blank solid core door at Lowes. Like was mentioned earlier, you don’t need too much depth and a 28 or 30 inch door is plenty. You can scan fakeberg marketplace and probably get what you need cheap.
Similar threads
