Due to my soon to be ex-wife's issues adhering to marriage vows I need to move my safe. It's a liberty fat boy 64. The safe is bolted to the floor in my shop, and I cannot get the bolts out. Broke a 1/2 inch socket on a large cheater trying the other day. Imapct also had no effect.
When I installed it I used the zinc lag sinkers set into the concrete with the epoxy the guy at Lowe's recommended. These suckers won't budge. Short of a torch or tannerite I'm not sure what to try now. I'd rather not destroy the safe, or leave it behind. I can't fit a sawzall blade under it, and if I could I'm not sure if I can find one long enough. I even considered cutting out the floor and just beating the slab off the bottom later, but I'm guessing that might cause problems...
Any thoughts or suggestions?
Thanks in advance!
Sent from my Pixel 2 XL using Tapatalk
When I installed it I used the zinc lag sinkers set into the concrete with the epoxy the guy at Lowe's recommended. These suckers won't budge. Short of a torch or tannerite I'm not sure what to try now. I'd rather not destroy the safe, or leave it behind. I can't fit a sawzall blade under it, and if I could I'm not sure if I can find one long enough. I even considered cutting out the floor and just beating the slab off the bottom later, but I'm guessing that might cause problems...
Any thoughts or suggestions?
Thanks in advance!
Sent from my Pixel 2 XL using Tapatalk