My good friend who is an awesome machinist and motor builder gave me a peak at his current project. This is a $9,000 bare block that needed additional machining including sleeves installed, the deck height machined, and the cylinders o-ringed. He was trimming the rings yesterday when I snapped this picture. He was gapping the rings to .036 to handle the twin turbos, 45 pounds of boost and the alchy. It probably took him 2 hours to gap the 16 rings. Talk about meticulous!
This is the Street Outlaws competitor that owns the motor and is replacing the current "3,500" hp motor.
This is the Street Outlaws competitor that owns the motor and is replacing the current "3,500" hp motor.