Lets see all the AR's!!

[Bootleggn]

Ah well, and thanks 4wheelphil

 

[AirMech74]

Hey look at it this way...just like a nice set of boobs...good things come in pairs

 

[264Magnum]

What sling mount are you using on the front?

 

[Bootleggn]

Got bored......

 

[Super Dave]

Just put it together this evening!!!!

Model "1" 7 1/2" upper
S&W M&P-15 empty receiver ($133 at Fred Baker's!)
DPMS parts kit
Ace buffer tube

I am "borrowing" the buffer, spring, and BCG from my M&P 16", until the new stuff gets here.

Thanks to everybody that I got the parts from!

 

[Winman]

This is my Long Range Stick I bought this a few years ago from coorsman_OK off of here. An have since put a brand new A3 upper along with a Rock 5R barrel with a 308 match chamber on it back in june. and a badger free float handguard and PRS stock. I am optics poor for right now with only a super sniper 16x on it but will be puting a NightForce Optics 5.5-22x50 Mil/Mil scope on it in the near future!!!! this shoots one hole groups at 100 yds as I got to find out this last week!!!! this Rifle was built up by 737Shark of Shark Suppressors for any of you who go to Snipershide you may know who I am talking about

 

[liliysdad]

What sling mount are you using on the front?

its one of the Troy rail sections cut down to a single slot. The actual mount is a Midwest Ind HD QD sling mounts, and mounted to that is a BFG Victory 2pt sling.

Since that photo, I have swapped the stock for a RRA Shorty fixed stock.

 

[Bootleggn]

This is my Long Range Stick I bought this a few years ago from coorsman_OK off of here. An have since put a brand new A3 upper along with a Rock 5R barrel with a 308 match chamber on it back in june. and a badger free float handguard and PRS stock. I am optics poor for right now with only a super sniper 16x on it but will be puting a NightForce Optics 5.5-22x50 Mil/Mil scope on it in the near future!!!! this shoots one hole groups at 100 yds as I got to find out this last week!!!! this Rifle was built up by 737Shark of Shark Suppressors for any of you who go to Snipershide you may know who I am talking about

That is nice

 

[264Magnum]

its one of the Troy rail sections cut down to a single slot. The actual mount is a Midwest Ind HD QD sling mounts, and mounted to that is a BFG Victory 2pt sling.

Since that photo, I have swapped the stock for a RRA Shorty fixed stock.

That's exactly what I was going to do. My plan was to cut down the 4" section since it already has the QD cup built in.

 

[liliysdad]

Mine is one of the older ones that did not come with the QD cup, and I was quite pissed. I have an email off to Troy to see if I can get the 4" section with the cup, and one of the 2" rail sections. Mine came with a 4: and two 3" pieces.