So it stays in? There is 0 travel after the hammer drops.it adjust overtravel of the trigger. this is how much the trigger moves AFTER tripping the hammer start moving.
So it stays in? There is 0 travel after the hammer drops.it adjust overtravel of the trigger. this is how much the trigger moves AFTER tripping the hammer start moving.
So it stays in? There is 0 travel after the hammer drops.
Dont know yet. Tomorrow is rang day. Should I take an Allen wrench with me? Why does my Ruger not have that screw but has a hole for one?How much to re-set?
Dont know yet. Tomorrow is rang day. Should I take an Allen wrench with me? Why does my Ruger not have that screw but has a hole for one?
So adjusted the screw to play with it and really didnt see much difference with it in ot out except all the way in and the hammer wouldnt fall at all. Adjusted out just enough so the hammer fell and left it. No one at the range knew anything about this adjustment screw but one guy. Mike at BBs seems pretty knowledgeable with these 1911s Still seems odd that my other 2 1911s have no screw in the trigger but there is a whole where one could go.You don't have an allen wrench in your range bag?
Because its....see above...8/
Some of the first 3.5" models were ...well.. kinda cheap. The newer ones are a little more...refined...8)
Should be fine , they shoot like any other 45......ummmm...pics...
My bad. I'll get some pics.Pics didnt load.
So adjusted the screw to play with it and really didnt see much difference with it in ot out except all the way in and the hammer wouldnt fall at all. Adjusted out just enough so the hammer fell and left it. No one at the range knew anything about this adjustment screw but one guy. Mike at BBs seems pretty knowledgeable with these 1911s Still seems odd that my other 2 1911s have no screw in the trigger but there is a whole where one could go.
No I dont know **** about it. That's why I asked.unless you know enough to ensure that the sear is not getting pounded to **** by the hammer, you should not be adjusting that from the factory setting.
Enter your email address to join: